【24h】

Study of the Interface of AI-7Si-10 vol. SiC_p cast Composites Treated with Sr

机译:Sr处理AI-7Si-10体积%SiC_p铸造复合材料界面的研究

获取原文
获取原文并翻译 | 示例

摘要

Effects of additions of Sr (in the range 0.05 to 0.5%) on the microstructural characteristics of the Al-7wt% Si-10 vol.% SiC_p composites have been studied. Optical Microscopy (OM), SEM, EDS, WDS microanalysis techniques and X-ray diffraction, powder techniques have been used for characterization of the composites. It was found that Sr concentrations between 0.05 to 0.20 facilitates incorporation of higher volume fraction of SiC particles and also does not contribute to the over modification of the matrix. However, higher wt% of Sr, Sr-rich compounds were found. These Strontium rich compounds were located at the matrix-ceramic interface.
机译:研究了添加Sr(范围为0.05%至0.5%)对Al-7wt%Si-10 vol。%SiC_p复合材料的微观结构特征的影响。光学显微镜(OM),SEM,EDS,WDS显微分析技术和X射线衍射,粉末技术已用于表征复合材料。已经发现,Sr浓度在0.05至0.20之间有利于掺入更高体积分数的SiC颗粒,并且也无助于基质的过度改性。然而,发现较高的Sr,富Sr化合物的重量%。这些富含锶的化合物位于基质-陶瓷界面处。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号