The effect of different crystal conditions of filler metal on the vacuum brazing of TiAl alloy and 42CrMo

摘要

Ti-based filler metal made by transient solidification and normal crystallization were selected for the vacuum brazing of the TiAl alloy and 42CrMo under different processing parameters. The results show that the tensile strength of the joint of transient solidified filler metal is higher than that of normal crystallized filler metal under the same processing parameters. By the analysis of SEM and X-ray diffracting (XRD) , it is found that the higher strength maybe caused by the generating of TiAl, TiNi and TiCu at the interface of joint made by transient solidified filler metal.