首页> 外文会议>2018 IEEE Indian Conference on Antennas and Propogation >Multi-band SIW antenna with modulated metasurface at 5G frequency
【24h】

Multi-band SIW antenna with modulated metasurface at 5G frequency

机译:具有5G频率调制表面的多波段SIW天线

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

This paper proposes a multi-band SIW antenna which is linearly polarized. The antenna consists of a T-shaped radiator inscribed on the upper side of the dielectric substrate. This radiator is responsible for multi-band occurrence. The operating frequency is chosen to be 28 GHz, which is a valid selection for 5G applications. An aperiodic modulated metasurface is employed as the ground plane for the proposed antenna. Modulated MTS is a great alternative to the metal ground as it enhances the gain and subsequently the front to back lobe ratio (FTBR) of the antenna. The substrate used is FR4 epoxy with a thickness of 0.8 mm. The simulations are done using ANSYS HFSS. Only simulated results are presented as the antenna fabrication is under process.
机译:本文提出了一种线性极化的多波段SIW天线。天线由刻在介电基板上侧的T形辐射器组成。该辐射体负责多频带的出现。选择的工作频率为28 GHz,这是5G应用的有效选择。非周期性调制超表面被用作所提出天线的接地平面。调制MTS是金属接地的理想选择,因为它可以增强天线的增益以及随后的前后波比(FTBR)。所使用的基材是厚度为0.8毫米的FR4环氧树脂。仿真使用ANSYS HFSS完成。由于天线的制造正在进行中,因此仅给出了仿真结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号