首页> 外文会议>IEEE Conference on Antenna Measurements and Applications >A Dual-Band PIFA for MIMO Half-duplex 4G and Future Full-Duplex 5G communication for Mobile Handsets
【24h】

A Dual-Band PIFA for MIMO Half-duplex 4G and Future Full-Duplex 5G communication for Mobile Handsets

机译:用于移动电话的MIMO半双工4G和未来的全双工5G通信的双频带PIFA

获取原文

摘要

This paper studies the design of a 4G/LTE and 5G antenna system dedicated to mobile terminals (MTs). Achievingthis target can't be detached from the fact of multimode functionality when designing antenna systems for MTs. Moreover, in line with the advantages covered by 5G over previous generations, it is good thinking that 5G acquires the fullduplex (FD) feature, which needs, in turn, multiple antennas. But, the design of multiple antennas in compact MTs is a significant challenge, due to both practical and fundamental design tradeoffs. In this paper, multimode mobile antenna system dedicated to FD 5G and Multi-Input-Multi-Output (MIMO) half duplex (HD) 4G applications are designed and studied. The results reveal that it is possible to achieve an efficient multimode antenna system when paying attention to some designing rules during the progress of the study. To demonstrate the effectiveness of the proposed approach, a dual-band Planar Inverted F - Antenna (PIFA) dedicated to MTs was first designed. Based on the obtained results, a double antenna structure, made up of two dual-band PIFA was then proposed. The two antennas terminal provides an isolation of over 20 dB for the 2.6 GHz band and over 35 dB for 3.6 GHz band without additional matching or decoupling structures. A trade-off analysis of bandwidth and efficiency is performed over different antenna locations and configurations. Finally, two fabricated prototypes verify the simulation results for representative cases.
机译:本文研究专用于移动终端(MT)的4G / LTE和5G天线系统的设计。在为MT设计天线系统时,要实现这一目标离不开多模功能。此外,与5G相比前几代产品所具有的优势一致,我们很好地认为5G具有全双工(FD)功能,而该功能又需要多个天线。但是,由于实际和基本设计之间的折衷,紧凑型MT中的多天线设计是一项重大挑战。本文设计并研究了专用于FD 5G和多输入多输出(MIMO)半双工(HD)4G应用的多模移动天线系统。结果表明,在研究过程中注意一些设计规则,就有可能实现高效的多模天线系统。为了证明所提出方法的有效性,首先设计了专用于MT的双频段平面倒F天线(PIFA)。根据获得的结果,提出了一种由两个双频PIFA组成的双天线结构。两个天线端子在2.6 GHz频段提供超过20 dB的隔离,在3.6 GHz频段提供超过35 dB的隔离,而无需其他匹配或去耦结构。在不同的天线位置和配置上进行带宽和效率的折衷分析。最后,两个预制的原型验证了代表性案例的仿真结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号