首页> 外文会议>High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283 >Fabrication of Vanadium Nitride by Carbothermal Nitridation Reaction
【24h】

Fabrication of Vanadium Nitride by Carbothermal Nitridation Reaction

机译:碳热氮化反应制备氮化钒

获取原文

摘要

Vanadium nitride is produced from V_2O_5 by carbon-thermal reduction and nitridation. When the sintered temperature is above 1273K, VN can be formed, and the nitrogen content of the products increased with the firing temperature raised, and then is the largest when the sintered temperature is 1573K. The C/V_2O_5 mass ratio of the green samples is the other key factor affecting on the nitrogen contents of the products. The nitrogen content of the products reaches the most when the C/V_2O_5 mass ratio is 0.33, which is the theoretical ratio of the Carbothermal nitridation of V_2O_5.
机译:氮化钒是通过碳热还原和氮化从V_2O_5生成的。当烧结温度高于1273K时,可形成VN,且产物的氮含量随焙烧温度的升高而增加,然后在烧结温度为1573K时最大。绿色样品的C / V_2O_5质量比是影响产品氮含量的另一个关键因素。当C / V_2O_5质量比为0.33时,产物的氮含量最高,这是V_2O_5碳热氮化的理论比率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号