首页> 美国卫生研究院文献>Materials >Fabrication and Characterization of Short Silicon Nitride Fibers from Direct Nitridation of Ferrosilicon in N2 Atmosphere
【2h】

Fabrication and Characterization of Short Silicon Nitride Fibers from Direct Nitridation of Ferrosilicon in N2 Atmosphere

机译:N2气氛中硅铁直接氮化的短氮化硅纤维的制备与表征

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Short silicon nitride fibers were fabricated by direct nitridation of ferrosilicon in N2 atmosphere, and their structure and possible growth mechanism were characterized and investigated. The rod-like fibers which were α-Si3N4 with a low degree of crystallization and a high aspect ratio had a diameter of about 4 μm and a length close to a few millimeters. Belt-like fibers with a width about 5 μm and a thickness about 1 μm were also found in the nitrides. Scanning electron microscope (SEM), transmission electron microscope (TEM), high resolution transmission electron microscope (HRTEM), and selected area electron diffraction (SAED) investigations indicated that the fibers were single-crystalline α-Si3N4 with few amorphous distributed in the edge region, and the fibers grew by vapor–liquid–solid (VLS) mechanism.
机译:在N 2气氛中通过硅铁直接氮化制备短氮化硅纤维,并对其结构和可能的生长机理进行了研究。具有低结晶度和高纵横比的α-Si3N4棒状纤维的直径约为4μm,长度接近几毫米。在氮化物中还发现了带状纤维,其宽度约为5μm,厚度约为1μm。扫描电子显微镜(SEM),透射电子显微镜(TEM),高分辨率透射电子显微镜(HRTEM)和选择区域电子衍射(SAED)研究表明,纤维为单晶α-Si3N4,边缘无定形分布很少区域,纤维通过气-液-固(VLS)机理生长。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号