首页>外文会议>High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283

High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283

召开年：2004
召开地：Shenzhen(CN)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.The Effect of Zirconia Sol-Gel Coatings on Mild Steel Oxidation Resistance

机译：氧化锆溶胶-凝胶涂层对低碳钢抗氧化性的影响
- 作者：Lefu Mei;Kaiming Liang;Haibin Li
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- zirconia;
- sol-gel coatings;
- oxidation;
2.Effects of Zircon Additive on the Properties of 95-Alumina Ceramic

机译：锆石添加剂对95氧化铝陶瓷性能的影响
- 作者：Benjun Cheng;Xingzhong Guo;Hui Yang;Jianming Zheng
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- zircon;
- zirconia;
- 95-alumina ceramic;
- property;
3.Study on Stability of Nano-Al_2O_3 Aqueous Suspension

机译：纳米Al_2O_3水悬浮液的稳定性研究
- 作者：Wei Zhao;Dean Yang;Xiuxin Yin;Tingxian Xu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- dispersant;
- Nano-Al_2O_3 suspension;
- stability;
4.Surface Modification of Al_2O_3 Fine Powders and Application in Epoxy Resin

机译：Al_2O_3细粉的表面改性及其在环氧树脂中的应用
- 作者：Shiguo Du;Jun Yan;Tonglai Zhang;Haiping Cui;Jinzhi Liu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Al_2O_3 fine powders;
- surface modification;
- heterogeneous azeotropic distillation;
5.Rheological Behaviors of Alumina Aqueous Suspensions

机译：氧化铝水悬浮液的流变行为
- 作者：Tiechao Wang;Jinlong Yang;Liguo Ma;Yong Huang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- suspensions;
- rheological;
- shear thinning;
6.Modification of Al_2O_3 Microfiltration Membrane by Nano-ZnO Coating

机译：纳米ZnO涂层对Al_2O_3微滤膜的改性
- 作者：Jianer Zhou;Jianqing Wu;Yongqing Wang;Weihui Jiang;Guanghua Ma;Ruibei Cao
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- homogeneous precipitation method;
- zinc oxide;
- modified coating;
- microfiltration membrane;
7.Mechanical and Wear Properties of Al_2O_3-15wtZrO_2 Composites

机译：Al_2O_3-15wt％ZrO_2复合材料的力学性能和磨损性能
- 作者：P. G. Rao;J. Q. Wu;J. D. Ye;Y. J. Wang;M. Iwasa
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Al_2O_3;
- ZrO_2;
- mechanical property;
- wear;
8.Fabrication of Nano-micron Al_2O_3-ZrO_2 Ceramic Eutectic Composites from The Melts by The SHS Metallurgical Process

机译：SHS冶金法从熔体中制备纳米微米Al_2O_3-ZrO_2陶瓷共晶复合材料
- 作者：Z.M. Zhao;L. Zhang;H.B. Bai;J. Zheng;J.J. Wang;Y. Fu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- SHS;
- nano-micron Al_2O_3-ZrO_2 ceramic composite;
- in-situ synthesis;
- symbiotic eutectic reaction;
9.Effect of Microstructure on the Wear Resistance of Alumina Dispersed Y_2O_3-ZrO_2 Ceramics

机译：微观结构对氧化铝分散Y_2O_3-ZrO_2陶瓷耐磨性的影响
- 作者：Xiaoping Liang;Zhengfang Yang;Qiming Yuan;Zhengguo Jin
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Al_2O_3 dispersed in ZrO_2 matrix (ADZ);
- microstructure;
- wear-resistance;
10.Cordierite-CeO_2 Composite Ceramic: A Novel Catalytic Support Material for Purification of Vehicle Exhausts

机译：堇青石-CeO_2复合陶瓷：一种用于净化汽车尾气的新型催化载体材料
- 作者：Z. M. Shi
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- cordierite;
- CeO_2;
- oxygen storage capacity;
- ceramic;
11.Wear Resistant of Al_2O_3/Heat-Resistant Steel at High Temperature

机译：Al_2O_3 /耐热钢的高温耐磨性
- 作者：Chonggao Bao;Jiandong Xing;Yimin Gao;Enze Wang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- composites;
- fraction of particle volume;
- particle coatings;
- particle size;
12.Wear of the Al_2O_3-Based Multi-ceramic Coatings Produced by SHS Flame Spraying

机译：SHS火焰喷涂产生的基于Al_2O_3的多层陶瓷涂层的磨损
- 作者：Xinkang Du;Jianjiang Wang;Minghui Ye;Jun Yan
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- SHS flame spray;
- ceramic coatings;
- wear quality;
13.Influence of Loading Conditions on Cyclic Compressive Fatigue Behavior of an Al_2O_3 Matrix Composite

机译：加载条件对Al_2O_3基复合材料循环压缩疲劳行为的影响
- 作者：Yang Zhou;Hong-Xiang Zhai;Ming-Xing Ai;Zhen-Ying Huang;Zhi-Li Zhang;Shi-Bo Li;Cui-Wei Li
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- ceramic composite;
- alumina;
- fatigue;
- cyclic compressive load;
14.Manufacture and Properties of AlON-TiN Particulate Composites

机译：AlON-TiN颗粒复合材料的制备与性能
- 作者：Zuotai Zhang;Xidong Wang;Mei Zhang;Wenchao Li
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- aluminum oxynitride-titanium nitride;
- mechanical properties;
- oxidation resistance;
- wear resistance;
15.In Situ Reaction Synthesis of Porous Silica-Matrix Ceramics

机译：多孔二氧化硅基陶瓷的原位反应合成
- 作者：Shuqiang Ding;Dongliang Jiang;Sumin Zhu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- porous ceramics;
- silica matrix;
- mechanical property;
- porosity;
16.Fabrication of Silica Colloidal Crystal Multilayer with Controlled Thicknesses by Vertical Deposition

机译：垂直沉积法制备厚度可控的二氧化硅胶体晶体多层膜
- 作者：Qunyan Li;Weimin Gao;Yunfa Chen;Peng Dong;Zhenjiang Wu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- colloidal crystals;
- multilayers;
- vertical deposition;
17.Mullite Composite Phase Nanocrystalline from High-silica Kaolin under Normal Pressure and Temperature: An Experimental Study

机译：常压常温下高硅高岭土莫来石复合相纳米晶的实验研究
- 作者：Nanchun Chen;Dong Chen
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- kaolin;
- mullite;
- hydrothermal crystallization;
- composite nanocrystalline;
18.High-Performance Ceramic Coatings Sprayed via Novel Supersonic Plasma Spraing System

机译：通过新型超音速等离子喷涂系统喷涂高性能陶瓷涂层
- 作者：Sheng Zhu;Binshi Xu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- supersonic plasma spraying;
- ceramic coatings;
- properties;
- microstructure;
19.Structure of the Coatings onto Ceramic Cutting Tools Deposited by Pulsed High Energy Density Plasma

机译：脉冲高能密度等离子体沉积在陶瓷切削刀具上的涂层结构
- 作者：Hezhuo Miao;Zhijian Peng;Longhao Qi;Feng Shi;Wenjie Si
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- PHEDP;
- ceramic cutting tools;
- TiN;
- TiCN;
- (Ti;
- Al)N;
- structure;
20.High Strength and High Toughness Anisotropic Silicon Nitrides Fabricated by Forging Technique

机译：锻造技术制备高强度高韧性各向异性氮化硅
- 作者：Naoki Kondo
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- silicon nitride;
- forging;
- anisotropic microstructure;
- strength;
- toughnes;
21.Production of Si_3N_4 Whiskers in Solid Mixtures through Vapor-solid Mechanism Using 2MgO 2Al_2O_3 5SiO_2 as Sintering Additives

机译：以2MgO 2Al_2O_3 5SiO_2作为烧结添加剂的汽固机理生产固体混合物中的Si_3N_4晶须。
- 作者：Wenli Guo;Tingxian Xu;Qiang Zou;Changchun Ge
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- silicon nitride whisker;
- thermodynamic calculation;
- growth mechanism;
22.Effects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si_3N_4 Ceramics

机译：孔隙形态对多孔Si_3N_4陶瓷制备及力学性能的影响
- 作者：Jian-Feng Yang;Ji-Qiang Gao;Guo-Jun Zhang;Ichiro Hayashi;Tatsuki Ohji
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- silicon nitride;
- pore morphology;
- mechanical properties;
- permeability.;
23.Effects of Technical Parameters on the Phase Composition and Microstructure of Yb α-Sialon Prepared by Combustion Synthesis

机译：工艺参数对燃烧合成Ybα-Sialon相组成和微观结构的影响
- 作者：G.H. Liu;K.X. Chen;H. P. Zhou;X.S. Ning;J.M.F. Ferreira
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Yb α-sialon;
- combustion synthesis;
- elongated grains;
24.Combustion Synthesis of β-SiAlON Whiskers

机译：β-SiAlON晶须的燃烧合成
- 作者：Renli Fu;Kexin Chen;Jose M. F. Ferreira
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- β-SiAlON;
- whiskers;
- combustion synthesis;
25.Characteristics of Machinable LaPO_4/Al_2O_3 Composites

机译：可加工LaPO_4 / Al_2O_3复合材料的特性
- 作者：Min Jiang;Jiachen Liu;Haiyan Du;Yirong Liu;Zhijun Cao
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- LaPO_4;
- Al_2O_3;
- character;
- machinable;
26.Preparation of CIM Feedstock of Al_2O_3-SiC Nanocomposite

机译：Al_2O_3-SiC纳米复合材料CIM原料的制备。
- 作者：Yan Luting;Si Wenjie;Xiong Tao;Miao Hezhuo
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Al_3O_3-SiC;
- nanocomposites;
- surface modification;
- CIM;
27.Pressureless Sintering the Al_2O_3/SiC Nanocomposites in Deoxidized Atmosphere

机译：脱氧气氛中无压烧结Al_2O_3 / SiC纳米复合材料
- 作者：Zhenzhen Peng;Shu Cai;Yanwei Wang;Houzheng Wu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Al_2O_3/SiC nanocomposites;
- deoxidized atmosphere;
- pressureless sintering;
28.The Study of Self-propagating High-temperature Synthesis of TiC-Al_2O_3/Fe Composites from Natural llmenite

机译：天然钛铁矿自蔓延高温合成TiC-Al_2O_3 / Fe复合材料的研究
- 作者：Zhengguang Zou;Jinlian Li;Yi Wu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- SHS;
- TiC-Al_2O_3/Fe composites;
- microstructure;
- properties;
29.Preparation of Nano Ni/Al_2O_3 Composite Powders

机译：纳米Ni / Al_2O_3复合粉的制备
- 作者：Qinfang Yan;Zhengren Huang;Shaomin Dong;Dongliang Jiang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- alumina;
- dispersion;
- precipitation method;
30.Synthesis of High Purity Ti_3AlC_2 Bulk Material by Hot-pressing

机译：热压法合成高纯度Ti_3AlC_2块状材料
- 作者：Chunqing Peng;Chang-an Wang;Yong Huang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Ti_3AlC_2 bulk material;
- high-purity;
- synthesis;
- hot-pressing;
31.Al_2O_3 Multiphase Ceramics Coatings Sprayed by SHS-RFS Based on the Cladding Powders

机译：SHS-RFS熔覆粉末喷涂Al_2O_3多相陶瓷涂层
- 作者：Jianjiang Wang;Xinkang Du;Hongwei Liu;Jun Yan
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- SHS;
- reactive flame spray;
- chemical copper-plating;
- ceramics coatings;
32.Reaction Synthesized Boron Nitride-Containing Composites (BNCC)

机译：反应合成的含氮化硼复合材料（BNCC）
- 作者：Guo-Jun Zhang;Tatsuki Ohji;Shuzo Kanzaki
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- boron nitride;
- reaction synthesis;
- ceramic composite;
- chemical reaction;
33.Study on the Performance of CBN Abrasives With Ti Coatings

机译：钛涂层CBN磨料性能研究。
- 作者：Z.H. Li;H.F. Zheng;Y.M. Zhu;Q.M. Yuan
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- CBN;
- Ti-coating;
- abrasive;
- performance;
34.Thermodynamics and Kinetic Considerations Behind the Growth of AlN Whiskers Synthesized by Carbothermal Reduction

机译：碳热还原法合成AlN晶须生长的热力学和动力学考虑
- 作者：Renli Fu;Heping Zhou;Kexin Chen;Jose M. F. Ferreira
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- aluminum nitride;
- crystal growth;
- thermodynamics;
- kinetics;
35.Influence of Powder Characteristics on Sintering of AlN Ceramics

机译：粉末特性对AlN陶瓷烧结的影响
- 作者：Jin-Yu Qiu;Koji Watari;Yuji Hotta;Kenshi Mitsuishi
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- aluminum nitride;
- sintering additive;
- agglomeration;
- densification;
36.Effect of Grain Growth Inhibitor on the Microstructure and Mechanical Properties of Ti(C,N)-Based Cermet

机译：晶粒长大抑制剂对Ti（C，N）基金属陶瓷显微组织和力学性能的影响
- 作者：Yong Zheng;Wenjun Liu;Quan Yuan;Lei Wen;Weihao Xiong
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- cermet;
- grain growth inhibitors;
- microstructure;
- mechanical properties;
37.Thermal Conductivity of the New Candidate Materials for Thermal Barrier Coatings

机译：新型热障涂层候选材料的导热系数
- 作者：Jingdong Wang;Wei Pan;Qiang Xu;Kazutaka Mori;Taiji Torigoe
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- rare-earth zirconate;
- thermal conductivity;
- thermal barrier coatings;
38.Preparation and Effectiveness of Antibacterial Hydroxyapatite Powder Containing Silver

机译：含银抗菌羟基磷灰石粉的制备及功效
- 作者：C.L. Shi;I. Ren;Z.X. Xiong
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- antibacterial powder;
- silver-containing hydroxyapatite;
- S.aureus;
- E.coli;
39.Precipitation of Hydroxyapatite on Oxide Film Containing Ca and P by Hydrotheraml Treatment

机译：加氢处理对羟基磷灰石在含钙和磷的氧化膜上的沉淀作用
- 作者：Fu Liu;Fuping Wang;T. Shimizu;K. Igarashi;Liancheng Zhao
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- titanium;
- microarc oxidation;
- oxide film;
- hydroxyapatite;
40.Anelasticity and Strength in Zirconia Ceramics

机译：氧化锆陶瓷的弹性和强度
- 作者：M. Matsuzawa;S. Horibe;J. Sakai
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- zirconia;
- anelasticity;
- fatigue;
- fracture;
- phase transformation;
41.Study on Preparation of Spherical Zirconia Powder in Microemulsion System and its Surface Characteristics

机译：微乳液体系中球形氧化锆粉体的制备及其表面特性的研究
- 作者：Jintao He;Tian Ma;Yong Huang;Jinlong Yang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- spherical;
- zirconia powder;
- microemulsion;
- surface characteristics;
42.MPACVD Nanocrystalline Diamond for Biomedical Applications

机译：用于生物医学应用的MPACVD纳米晶金刚石
- 作者：Chuan-Lin Zheng;Rong Qi;Wu-Bao Yang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- MPACVD;
- nanocrystalline;
- diamond;
- biomedical applications;
43.Effect of Oxidation on the Wear Behavior of a ZrN Coating

机译：氧化对ZrN涂层磨损行为的影响
- 作者：E. Atar;H. Cimenoglu;E. S. Kayali
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- coating;
- PVD;
- oxidation;
- ZrN and Wear;
44.Effect of Dopants on the Corrosion Behaviour of Zirconia by Steel at High Temperature

机译：掺杂对钢在高温下氧化锆腐蚀行为的影响
- 作者：Yanling Guo;Shigang Long;Rainer Telle
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- zirconia;
- dopants;
- corrosion;
- Y_2O_3;
- CeO_2;
45.The Influence of Nanosized Leucite on Dental Porcelain Properties

机译：纳米白云母对牙科瓷性能的影响
- 作者：Jinping Yang;Jianqing Wu;Pinggen Rao;Chongfei Xin;Dongdan Chen
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- leucite;
- dental porcelain;
- flexural strength;
- thermal expansion coefficient;
46.Fabrication of Vanadium Nitride by Carbothermal Nitridation Reaction

机译：碳热氮化反应制备氮化钒
- 作者：Xitang Wang;Zhuofu Wang;Baoguo Zhang;Chengji Deng
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- vanadium nitride;
- V_2O_5;
- carbothermal nitridation reaction;
47.Structural Assessment of Microsphere-based Tissue Engineered Scaffold from Poly(lactic acid)/β-Tricalcium Phosphate

机译：聚乳酸/β-磷酸三钙的微球基组织工程支架的结构评价
- 作者：Yingjun Wang;Jianhua Ge;Yudong Zheng;Xiaohui Zhang;Xiaofeng Chen;Wei Ran;Gang Wu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- microsphere;
- tissue engineering scaffold;
- poly(lactic acid);
- β-tricalcium phosphate;
48.The Mechanism of the Formation of MoSi_2 by Self-propagating High-temperature Synthesis

机译：自蔓延高温合成形成MoSi_2的机理
- 作者：Jianying Gao;Wan Jiang;Gang Wang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- SHS;
- MoSi_2;
- reactive diffusion;
- dissolution-precipitation;
49.Effects of Ingredients and Post-heat Treatment on Phase Transformation and Structure of Bioactive Composite Coatings

机译：成分和后热处理对生物活性复合涂层相变和结构的影响
- 作者：Muqin Li;Dashan Shang;Chen Ma;Shiqin Yang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- subsonic thermal spraying;
- biocoating;
- phase transformation;
- post-heat treatment;
50.The Fracture Toughness and DBTT of MoB Particle-Reinforced MoSi_2 Composites

机译：MoB颗粒增强的MoSi_2复合材料的断裂韧性和DBTT
- 作者：Zhi Xiong;Gang Wang;Wan Jiang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- MoSi_2;
- MoB;
- MSP;
- fracture toughness;
- DBTT;
51.Improving Subcritical Crack Growth Resistance for Alumina Glass Dental Composite

机译：改善氧化铝玻璃牙科复合材料的亚临界裂纹增长抗性
- 作者：Q. Zhu;G. de With
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- bioceramics;
- all-ceramic dental composites;
- alumina glass composite;
- subcritical crack growth;
52.Study on the Wear Resistance of Micro-nanostructured WC Composite Coating Sintered by Induced Heating

机译：感应加热烧结微纳米WC复合涂层的耐磨性研究
- 作者：Zhenting Wang;Huahui Chen
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- induced heating sintering;
- wear resistance;
- micro-nanostructured WC coatings;
53.Novel Low Thermal Conductivity Ceramic Materials for Thermal Barrier Coatings

机译：用于热障涂层的新型低导热陶瓷材料
- 作者：Wei Pan;Qiang Xu;Longhao Qi;Jingdong Wang;Hezhuo Miao;Kazutaka Mori;Taiji Torigoe
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- ceramics;
- thermal barrier coatings;
- low thermal conductivity;
54.Determination of the Load-Independent Hardness by Analyzing the Peak-Load-Dependence of the Unloading Slope in Nanoindentation

机译：通过分析纳米压痕中卸载斜率的峰值载荷相关性来确定与载荷无关的硬度
- 作者：Jianghong Gong
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- hardness;
- nanoindentation;
55.The Toughening Action of Comprehensive Transformation on Mixed Mode Ⅱ- Ⅲ Ceramics

机译：综合转变对Ⅱ-Ⅲ混合陶瓷的增韧作用
- 作者：Xinhua Ni;Xiequan Liu;Junying Wang;Xiaobo Lu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- comprehensive transformation;
- toughening ceramics;
- mixed mode Ⅱ- Ⅲ crack;
56.Sphering Mechanism for the Green Ceramic Balls Ground with the Two-wheels Grinding Technique

机译：两轮磨削的生陶瓷球的磨削机理
- 作者：Chengzu Ren;Daxiao Gao;Lianhong Zhang;Xinmin Jin
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- green ceramic balls;
- grinding;
- sphering mechanism;
57.Wettability of SiC/Ag Plus Ti System

机译：SiC / Ag Plus Ti系统的润湿性
- 作者：Shujie Li;Hongli Liu;Jianjun Zhang
- 会议名称：《》 | 2004年
- wettability;
- contact angle;
- interface;
58.Stages of Reactive Wetting

机译：反应润湿的阶段
- 作者：S. Agathopoulos;D.U. Tulyaganov;J.M.F. Ferreira
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- reactive wetting;
- wettability;
- modeling;
- stages;
- kinetics;
- interfaces;
59.Preparation of Oriented Porous Silicon Carbide Bodies by Freeze-Casting Process

机译：冷冻铸造法制备多孔碳化硅多孔体
- 作者：Jie Tang;Yufeng Chen;Hua Wang;Hailin Liu;Qisheng Fan
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- freeze-casting;
- silicon carbide;
- pore structure;
60.Characterization of Fiber-Reinforced SiC Composites by Precursor-Pyrolysis and Hot-Pressing

机译：先驱体热解和热压法表征纤维增强SiC复合材料
- 作者：Xin-Bo He;Xuan-Hui Qu;Chang-Rui Zhang;Xin-Gui Zhou
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- SiC-based composites;
- fibers;
- fracture behavior;
61.SiC Coatings Deposited by RF Magnetron Sputtering

机译：射频磁控溅射沉积SiC涂层
- 作者：Huidong Tang;Shouhong Tan;Zhengren Huang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- SiC coating;
- RF magnetron sputtering;
- RMS surface roughness;
- AFM;
62.Erosive Wear Behavior of Reaction Sintered Si_3N_4-SiCp Composite Ceramic in Liquid-Solid Flow

机译：反应烧结Si_3N_4-SiCp复合陶瓷在固液中的冲蚀磨损行为
- 作者：Z. H. Huang;W. Pan;L.H. Qi;H.Z. Miao
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Si_3N_4-SiC_p composite ceramic;
- liquid-solid flow;
- erosive wear mechanism;
63.Friction and Wear Characteristics of SiC and Si_3N_4 Ceramics Against ZrO_2 Ceramic Under Dry Friction

机译：干摩擦下SiC和Si_3N_4陶瓷对ZrO_2陶瓷的摩擦磨损特性
- 作者：X. Tian;B. Lin;W.L. Zhang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- dry friction;
- wear;
- ceramics;
64.Mechanical Properties and Oxidation Behavior of Si_3N_4/BN Laminated Ceramics

机译：Si_3N_4 / BN层压陶瓷的力学性能和氧化行为
- 作者：Cuiwei Li;Chang-an Wang;Yong Huang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- laminated ceramics;
- Si_3N_4;
- mechanical property;
- oxidation;
65.TiB_2/AlN/Cu Functionally Graded Materials (FGMs) Fabricated by Spark Plasma Sintering (SPS) Method

机译：火花等离子体烧结（SPS）法制备的TiB_2 / AlN / Cu功能梯度材料（FGM）
- 作者：Songzhe Jin;Hailong Zhang;Jing-Feng Li;Shusheng Jia
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- functionally graded material;
- TiB_2/AlN/Cu;
- spark plasma sintering;
66.Diamond Coated on Cobalt-Deficient Gradient Tungsten Carbide

机译：缺钴梯度碳化钨上的金刚石涂层
- 作者：Li Gou;Jilei Zhu;Junguo Ran;Suangfeng Yan
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- diamond coatings;
- tungsten carbide;
- chemical vapor deposition;
67.Study of Ti(C,N)-based Cermets Fabricated by Pressureless-HIP Sintering

机译：无压HIP烧结制备Ti（C，N）基金属陶瓷的研究
- 作者：Xianjuan Ni;Longhao Qi;Wei Wang;Wei Pan
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Ti(C;
- N)-based cermets;
- pressureless-HIP;
68.Fabrication of TiC-Ti Porous Materials by Combustion Synthesis

机译：燃烧合成制备TiC-Ti多孔材料
- 作者：Wei-Ping Shen;Wen Ma;Shu-Yuan Gu;Ye Zhang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- combustion synthesis;
- porous materials;
- TiC;
- Ti;
69.Combustion Synthesis and Two-time Densification of TiB_2-Cu Composites

机译：TiB_2-Cu复合材料的燃烧合成与二次致密化
- 作者：Changqing Hong;Xinghong Zhang;Jiecai Han;Qiang Xu;Xiaodong He
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- combustion synthesis;
- two-time hot pressing;
- TiB_2-Cu;
70.Effect of Pressure on TiB_2-Cu Composite via In-Situ Reaction Synthesis

机译：原位反应合成压力对TiB_2-Cu复合材料的影响
- 作者：Yufeng Sun;Qiang Xu;Xinghong Zhang;Jiecai Han;Jinhuai Liu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- composite;
- reaction synthesis;
- pressure;
- mechanical properties;
71.Tribological Behaviour of Combined Coatings Deposited on Aluminium

机译：铝沉积复合涂层的摩擦学行为
- 作者：U. Akin;H. Mindivan;R. Samur;E.S. Kayali;H. Cimenoglu
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- ceramic;
- coating;
- polymer;
- wear;
72.Crystallization and Mechanical Properties of Spodumene-Diopside Glass Ceramics

机译：锂辉石-透辉石微晶玻璃的结晶和力学性能
- 作者：An-min Hu;Kai-ming Liang;Feng Zhou;Fei Peng;Guo-liang Wang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- crystallization;
- mechanical properties;
- glass ceramic;
73.Preparation and Characterization of the Nano Powder for Al_2O_3-SiO_2-CaF_2 Glass by Homo-precipitation Method

机译：均相沉淀法制备Al_2O_3-SiO_2-CaF_2玻璃纳米粉及其表征
- 作者：G.C. Yuan;Q.G. Wu;G.X. Zeng;X.H. Zhang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- bio-glass;
- nano-powder;
- preparation;
- characterization;
74.Micro-Morphology of Crystal Separated from Glass by the Heat-Treatment with An Electric Field

机译：电场热处理从玻璃中分离出的晶体的微观形态
- 作者：Guoliang Wang;Kaiming Liang;Wei Liu;Anmin Hu;Feng Zhou;Hua Shao
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- glass;
- electric field;
- micro-morphology;
75.Indentation Size Effect in the Nanohardness of Soda-Lime Glass

机译：钠钙玻璃纳米硬度的压痕尺寸效应
- 作者：Zonghuai Li;Jianghong Gong;Zhijian Peng;Hezhuo Miao
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- hardness;
- indentation;
- glass;
76.Study on Corrosion Mechanism of CAS Glass-ceramic to Refractories by EPMA

机译：EPMA研究CAS玻璃陶瓷对耐火材料的腐蚀机理
- 作者：Hong Li;Jinshu Cheng;Xinjiang Long
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- CAS glass-ceramic;
- refractory;
- corrosion;
- EPMA;
77.Study of Thermal Shock Resistance of Sagger Plate Used in Floppy Magnets Sintering

机译：软磁烧结用中厚板的耐热冲击性能研究
- 作者：Feng Cao;Xingrong Wu;Rainer Telle
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- sagger plate;
- thermal shock resistance;
- zircon powder;
78.Unlubricated Sliding Wear of TiN Particle Reinforced Si_3N_4 Matrix Composites Against AISI-52100 Steel Ball

机译：TiN颗粒增强的Si_3N_4基复合材料对AISI-52100钢球的无润滑滑动磨损
- 作者：Chien-Cheng Liu;Jow-Lay Huang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
79.Oxidation Behaviors of MgAlON/Si_3N_4 Composite at High Temperature

机译：MgAlON / Si_3N_4复合材料在高温下的氧化行为
- 作者：H.X. Zhang;Y. Huang;Y.R. Hong;J.L. Sun;N.S. Zhou
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- MgAlON/Si_3N_4;
- composite;
- self-healing property;
- oxidation behavior;
80.A Soft Ceramic Ti_3SiC_2 with Microscale Plasticity at Room Temperature

机译：室温下具有微尺度可塑性的软陶瓷Ti_3SiC_2
- 作者：Shibo Li;Hongxiang Zhai
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Ti_3SiC_2 ceramic;
- microscale plasticity;
- deformation;
- mechanisms;
81.Frictional Layer and Its Antifriction Effect in High-Purity Ti_3SiC_2 and TiC-Contained Ti_3SiC_2

机译：高纯Ti_3SiC_2和含TiC的Ti_3SiC_2的摩擦层及其减摩作用
- 作者：Hongxiang Zhai;Zhenying Huang;Yang Zhou;Zhili Zhang;Yifan Wang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Ti_3SiC_2;
- frictional layer;
- antifriction effect;
- composition;
- morphology;
82.Sliding Friction Behavior of Bulk Ti_3SiC_2 under Different Normal Pressures

机译：不同常压下块体Ti_3SiC_2的滑动摩擦行为
- 作者：Zhenying Huang;Hongxiang Zhai;Yang Zhou;Yifan Wang;Zhili Zhang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Ti_3SiC_2;
- friction behavior;
- surface layer;
- antifriction effect;
83.Fabrication and Mechanical Properties of HAp/Ti_3SiC_2 (60 vol.) Composite by Sparkle Plasma Sintering

机译：闪光等离子体烧结制备HAp / Ti_3SiC_2（60％（体积））复合材料及其力学性能
- 作者：Suilin Shi;Wei Pan;Minghao Fang;Zhenyi Fang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- HAp/Ti_3SiC_2;
- mechanical properties;
- composite;
- sparkle plasma sintering (SPS);
84.Fabrication and Properties of Ti_3AlC_2-Based Ceramics by Two-Step Method

机译：两步法制备Ti_3AlC_2基陶瓷及其性能
- 作者：Chang-An Wang;Aiguo Zhou;Chunqin Peng;Yong Huang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Ti_3AlC_2;
- ceramics;
- two-step method;
- mechanical properties;
85.Microstructure and Mechanical Performances of Plasma-sprayed Functionally Gradient HA-ZrO_2-Bioglass Coatings

机译：等离子喷涂功能梯度HA-ZrO_2-生物玻璃涂层的微观结构和力学性能
- 作者：C.Y. Ning;Y.J. Wang;W.W. Lu;X.F. Chen;G. Wu;N.R. Zhao
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- nanoindentation;
- functionally gradient coating;
- structural characteristic;
86.Preparation and Characterization of Compositionally Graded Epitaxial Barium Strontium Titanate Thin Films via Scanning Probe Microscopy

机译：成分组成梯度的外延钛酸锶锶钡薄膜的制备及表征
- 作者：S. G. Lu;Haydn Chen;C. L. Mak;K. H. Wong;H. L. W. Chan;C. L. Choy;J. J. Xu;S. Q. Shi
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- barium strontium titanate;
- thin film;
- scanning force microscopy;
87.The Preparation and Properties of New Silver-Metal Oxide Graded Composite Electrical Contact Materials

机译：新型银-金属氧化物梯度复合电触头材料的制备与性能
- 作者：Y. Wang;F. Zhang;L. Z. Qi;L. Wang;L. C. Cheng
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- metal oxide;
- silver;
- electrical contact;
- functionally graded material;
88.Preparation of Multilayer Barium Titanate PTC Thermistor with Low Room Temperature Resistance

机译：室温低电阻的多层钛酸钡PTC热敏电阻的制备
- 作者：Dongxiang Zhou;Huan Liu;Shuping Gong;Daoli Zhang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- multilayer PTC thermistor (MLPTC);
- low resistance;
- roll forming;
- lamination;
89.Application of Ceramics Metal Functionally Graded Materials on Green Automobiles

机译：陶瓷金属功能梯度材料在绿色汽车上的应用
- 作者：Li Yong;Song Jian;Zhi Min
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- functionally graded materials;
- green automobiles;
- governing equation;
90.Solar Cells from Thin Silicon Layers on AlN

机译：AlN上薄硅层的太阳能电池
- 作者：Zhijian Wan;Yong Huang;Houxing Zhang;Haifeng Li
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- ceramic substrate;
- poly-silicon film;
- rapid thermal chemistry vapor deposition;
91.Negative Thermal Expansion up to 1000℃ of ZrTiO_4-Al_2TiO_5 Ceramics for High-Temperature Applications

机译：高温应用的ZrTiO_4-Al_2TiO_5陶瓷的负热膨胀至1000℃
- 作者：Ik Jin Kim;Hyung Chul Kim;In Sub Han;Christos G. Aneziris
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- Al_2TiO_5;
- ZrTiO_4;
- negative thermal expansion;
- thermal-shock-resistance;
- thermal durability;
92.Mechanical Properties of Macroporous Biphasic Calcium Phosphate Bioceramics Fabricated Using a Porogen

机译：用致孔剂制备的大孔双相磷酸钙生物陶瓷的力学性能
- 作者：Jean-Francois Catagne;Jeanne Chamousset;Lise-Marie Minois;Alexandre Ponsinet;Jean-Michel Bouler;Franck Tancret
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- calcium phosphate;
- sintering;
- porosity;
- mechanical properties;
- toughness;
- indentation;
- modelling;
93.Gelcasting of Mechanochemically Synthesized Hydroxyapatite

机译：机械化学合成羟基磷灰石的凝胶铸造
- 作者：Yu Jia;Yuji Hotta;Kimiyasu Sato;Koji Watari;Yoshinori Kanno
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- solid-state synthesis;
- hydroxyapatite;
- gelcasting;
94.Synthesis of Calcium Phosphate/gypsum Composite Powders

机译：磷酸钙/石膏复合粉的合成
- 作者：Dean Yang;Zi Yang;Weijie Hu;Yuanyuan Li;Huan Wang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- calcium phosphate;
- gypsum;
- composite;
95.rocessing of Calcium Phosphate Porous Materials by 'Self-setting'

机译：“自定”处理磷酸钙多孔材料
- 作者：Shu Cai;Yanwei Wang;Kangde Yao
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- porous materials;
- calcium phosphate;
- self-setting;
- gelatin swelling;
96.Setting Behavior of Fast-Setting Calcium Phosphate Cement with Mineral Phase of Bone

机译：骨矿相快速固化磷酸钙水泥的固化行为
- 作者：Pan Jian;Tian Jiemo;Dong Limin;Wang Chen
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- FSCPC;
- hydroxyapatite;
- mineral phase of bone;
97.Apatite Formation on Porous TCP In vitro: A Comparative Study between Static and Dynamic RSBF Systems

机译：多孔TCP体外磷灰石形成：静态和动态RSBF系统的比较研究
- 作者：Chunlin Deng;Jiyong Chen;Yang Leng;Xinglong Wang;Yao Wu;Hongsong Fan;Xingdong Zhang
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- TCP;
- simulation in vitro;
- RSBF;
- apatite;
98.Improving the Suspension Property of Non-plastic Material Slurry with Lecithin

机译：卵磷脂改善非塑料材料浆料的悬浮性能
- 作者：Guanghua Ma;Yingjun Wang;Aili Ma;Huijuan Shen
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- lecithin;
- suspension;
- slurry;
99.Studies on the Improving Performance of Ordinary Concrete

机译：普通混凝土改善性能的研究
- 作者：Feng Xing
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- ordinary concrete;
- performance-enhanced;
- composite ultra-fine powder;
100.The Brazilian Reliability Test and Micromechanical Modelling for Channelled Cylinders of Multiphased Porous Ceramics

机译：多相多孔陶瓷通道槽的巴西可靠性测试和微机械建模
- 作者：Frederic Osterstock;loannis St. Doltsinis;Olivier Vansse
- 会议名称：《High-Performance Ceramics III pt.2; Key Engineering Materials; vol.280-283》 | 2004年
- reliability;
- multiphased porous ceramics;
- brazilian test;
- micromechanical simulation;