THE ATTACHMENT OF CARBON NANOTUBE ON A BLUNT AFM TIP USING ELECTRIC FIELDS

摘要

We report a simple, low cost, reliable technique of making carbon nanotube (CNT) modified atomic force microscopy (AFM) tip. We used the dielectrophoresis and the electrophoresis to align and deposit carbon nanotubes on the end of the AFM tip. From the simulation and the various experiments, we obtained the optimal electric condition, 0.32Vpp/μm. Also, we found that the blunt shape of the tip's apex is more effective than sharpened one. Through the experiments, we verified that the blunt shape is more effective over 50% than the sharpened one in the attachment of CNTs. By comparing the scanning results between the CNT modified tip and a normal AFM tip, we obtained the improvement in efficiency of 23%.