REPEATEDLY UTILIZING OF CARBON FIBER CHEMISTRY COPPER PLATING WASTE LIQUID

摘要

Some literatures discussed on how to recycle the various reagent, but the discussion on how to reuse the waste liquid directly is very little. How to reuse the waste liquid directly was researched in this paper. Firstly, the waste liquid should be filtrated to remove the impurity; then some quantity of H_2O_2 solution was dripped into the waste liquid to pretreat it; finally, CuSO_4 solution was added into the treated waste liquid and the pH was adjusted to about 12, then some HCHO solution was added into the waste liquid, in which the treated carbon fiber can be plated. The morphology and composition of coatings were investigated by means of Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS), the deposition rate was mensurated by the way of dissolution. The results indicated that, the plating effect was basically identical with new plating solution, and the solution is stable, and the plating rate is still about 0.8μm/h, and the copper coating is even and combines closely with carbon fiber. According to this way, the waste liquid can be reuse 5～7 times.