【24h】

Focusing the Research Agenda for Simulation Training Visual System Requirements

机译:关注研究议程以模拟训练视觉系统需求

获取原文
获取原文并翻译 | 示例

摘要

Advances in the capabilities of the display-related technologies with potential uses in simulation training devices continue to occur at a rapid pace. Simultaneously, ongoing reductions in defense spending stimulate the services to push a higher proportion of training into ground-based simulators to reduce their operational costs. These two trends result in increased customer expectations and desires for more capable training devices, while the money available for these devices is decreasing. Thus, there exists an increasing need to improve the efficiency of the acquisition process and to increase the probability that users get the training devices they need at the lowest practical cost. In support of this need the IDEAS program was initiated in 2010 with the goal of improving display system requirements associated with unmet user needs and expectations and disrupted acquisitions. This paper describes a process of identifying, rating, and selecting the design parameters that should receive research attention. Analyses of existing requirements documents reveal-that between 40 and 50 specific design parameters (i.e., resolution, contrast, luminance, field of view, frame rate, etc.) are typically called out for the acquisition of a simulation training display system. Obviously no research effort can address the effects of this many parameters. Thus, we developed a defensible strategy for focusing limited R&D resources on a fraction of these parameters. This strategy encompasses six criteria to identify the parameters most worthy of research attention. Examples based on display design parameters recommended by stakeholders are provided.
机译:与显示相关的技术的功能的进步,以及在模拟训练设备中的潜在用途,一直在迅速发展。同时,国防开支的不断减少刺激了军种将更多比例的训练推向地面模拟器,以降低其运营成本。这两种趋势导致增加的客户期望和对功能更强大的训练设备的需求,而这些设备可用的资金却在减少。因此,越来越需要提高获取过程的效率并增加用户以最低的实际成本获得他们需要的训练设备的可能性。为了满足这种需求,IDEAS计划于2010年启动,目的是改善与未满足的用户需求和期望以及采购中断有关的显示系统要求。本文介绍了确定,评估和选择应引起研究关注的设计参数的过程。对现有需求文档的分析表明,通常会调用40至50个特定的设计参数(即分辨率,对比度,亮度,视场,帧频等)来获取模拟训练显示系统。显然,没有研究工作可以解决这么多参数的影响。因此,我们制定了合理的策略,将有限的研发资源集中在这些参数的一部分上。该策略包含六个标准,以确定最值得研究关注的参数。提供了基于利益相关者推荐的显示设计参数的示例。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号