【24h】

High Repetition Pulse Generation Using LiNbO_3 Modulators

机译:使用LiNbO_3调制器的高重复脉冲生成

获取原文
获取原文并翻译 | 示例

摘要

Subsystems based on LiNbO_3 modulators are attractive because the modulators are now commercially available, can operate up to very high speeds, and can operate over a wide wavelength range. We describe the principle of operation and performance of high repetition rate pulsed sources based on LiNbO_3 modulators. We have generated transform limited pulses at 20 GHz repetition rate with a pulsewidth of 8 ps and at 40 GHz repetition rate with a pulsewidth of 6.5 ps using two modulators in series. These modulators were driven by sinusoidal signals at 10 GHz. The analysis shows generation of shorter pulses at higher repetition rate is feasible with higher bandwidth modulators.
机译:基于LiNbO_3调制器的子系统很有吸引力,因为这些调制器现在已经可以购买到,可以以很高的速度运行,并且可以在很宽的波长范围内运行。我们描述了基于LiNbO_3调制器的高重复频率脉冲源的工作原理和性能。我们已使用两个串联的调制器以20 GHz重复速率和8 ps的脉冲宽度以及40 GHz重复速率和6.5 ps的脉冲宽度生成了变换受限脉冲。这些调制器由10 GHz的正弦信号驱动。分析表明,对于较高带宽的调制器,以较高的重复频率生成较短的脉冲是可行的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号