DEVELOPMENT OF SMART MATERIAL - HYDRAULIC PUMPS AND ACTUATORS

摘要

Smart materials such as piezoelectrics and magnetostrictives produce mechanical power in a form that is improperly matched to many -applications. When packaged in typical ways, these stiff materials have excess force but are deficient in displacement. Recent research has suggested that smart materials can be used for the pressurization and pump stage in electrohydrostatic actuators (EHAs). EHAs offer advantages over traditional centralized hydraulic systems by providing local pressurization in a closed fluid system and eliminating the need for distributed, high-pressure fluid lines. Given inherent material power densities, smart material-based EHAs could produce higher power output compared to electromagnetic actuators. High frequency, low displacement smart material actuation, typically operated in the range of 500 Hz, but in some cases much higher, is rectified via fluid flow to produce larger output displacements at lower frequencies. Valve limitations, mechanical compliances, and fluid compressibility account for significant losses in the pumps. Continuing previous research, this paper describes design approaches that address and attempt to minimize losses. Piezoelectric and magnetostrictive devices are compared, and the design and testing of magnetostrictive pumps is described in greater detail, with special considerations given to heat generation and improved efficiency.