首页> 外文会议>8th Intl Conf on Fourier Transform Spectroscopy >IR-ATR spectroscopic determination of the diffusion coefficients of carbohydrates in polymer matrices
【24h】

IR-ATR spectroscopic determination of the diffusion coefficients of carbohydrates in polymer matrices

机译:红外-ATR光谱法测定碳水化合物在聚合物基质中的扩散系数

获取原文
获取原文并翻译 | 示例

摘要

Abstract: During the past few years, the importance of membranes in chemical and biotechnological applications, such as separation processes and biosensor construction, has dramatically increased. As a consequence, membrane properties have to be characterized very thoroughly with special respect to diffusivity and selectivity. Whereas most techniques for the determination of diffusion coefficients require sophisticated and often indirect methods for the detection of the analyte diffusing through the membrane, which generally do not allow monitoring of the diffusion process continuously, we present in this work an experimentally simple and straightforward method employing FTIR- ATR spectroscopy. The diffusion of glucose into a PVA membrane is chosen as a model example for the determination of carbohydrates in polymer matrices due to its special relevance in biosensor construction. The method is based on monitoring the time-dependent change in absorption due to the diffusion of the glucose into the polymer membrane. After reaching a steady-state, the normalized absorbance plot (A/A$INF@) versus time can be used for numerical evaluation. The diffusion coefficient is determined by comparing the experimental with simulated data using the membrane thickness $iota and the diffusion coefficient D as simulation parameters. For this reason, the performance of a recursive and two non-recursive models for the description of the diffusion process is examined. Modifications in the second non-recursive algorithm finally resulted in very good agreement with the experimental data. This work marks the first application of IR-ATR spectroscopy for the determination of diffusion coefficients even as large as of the order of 10$+$MIN@6$/ cm$+2$//sec.!4
机译:摘要:在过去的几年中,膜在化学和生物技术应用(例如分离过程和生物传感器构造)中的重要性已大大提高。因此,必须特别针对扩散性和选择性非常彻底地表征膜的性能。尽管大多数用于确定扩散系数的技术都需要复杂且通常是间接的方法来检测通过膜扩散的分析物,但这些方法通常无法连续地监测扩散过程,但我们在这项工作中提出了一种实验简单,直接的方法,采用FTIR-ATR光谱学。由于葡萄糖在生物传感器结构中的特殊意义,因此选择了将葡萄糖扩散到PVA膜中作为测定聚合物基质中碳水化合物的模型实例。该方法基于监测由于葡萄糖扩散到聚合物膜中引起的吸收随时间的变化。达到稳态后,可以使用归一化吸光度图(A / A $ INF @)与时间的关系进行数值评估。通过使用膜厚度$ iota和扩散系数D作为模拟参数,通过将实验数据与模拟数据进行比较来确定扩散系数。因此,检查了用于描述扩散过程的递归模型和两个非递归模型的性能。第二种非递归算法的修改最终导致与实验数据非常吻合。这项工作标志着IR-ATR光谱法在确定扩散系数(甚至高达10 $ + $ MIN @ 6 $ / cm $ + 2 $ // sec)的量级中的首次应用!4

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号