Investigation of effect of ' 6-α' transformation during homogenization heat treatment on fracture of intermetallic particles in Al-Mn-Mg alloy

机译：均质化热处理过程中“6-α”相变对Al-Mn-Mg合金中金属间化合物断裂影响的研究

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

This study start with the features of the '6-α' transformation (i.e.transformation from (Fe, Mn)Al6 phase to α-Al12 (Fe,Mn) 3Si phase) during homogenization heat treatment in Al-Mn-Mg alloy.Groups of sample with different transformation levels were obtained by respective homogenization methods.The effects of α phase content and the inner Al spots on fracture of the coarse intermetallic particles during hot rolling were also discussed.

机译：本研究从Al-Mn-Mg合金均质化热处理过程中的``6-α''转变（即从（Fe，Mn）Al6相转变为α-Al12（Fe，Mn）3Si相）的特征开始。分别采用均质方法获得了不同转变水平的样品。探讨了α相含量和内部Al斑对热轧过程中粗金属间颗粒断裂的影响。

著录项

来源
《2nd International Conference on Energy and the Future of Heat Threatment and Surface Engineering》|2014年|116-119|共4页
会议地点 Beijing(CN)
作者
ZHANG Yonghao; LIU Qing; HUANG Wenrong; HUANG Shuke;
展开▼
作者单位

Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang 621900, China;

College of Materials Science and Engineering, Chongqing University, Chongqing 400030, China;

Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang 621900, China;

Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang 621900, China;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类金属学与热处理;
关键词
Al-Mn-Mg alloy; homogenization heat treatment; 6-α transformation; Al spot; fracture;

机译：Al-Mn-Mg合金；均匀化热处理；6-α相变； Al点；断裂;

相似文献

外文文献
中文文献
专利

1. 600℃ 热处理时Al-4Ni-2Mn合金中Al9(Mn,Ni)2共晶相的相变行为 [J] . 余文涛, 郝启堂, 王倩中国有色金属学报（英文版） . 2018,第010期
2. 600°C热处理时Al-4Ni-2Mn合金中Al9(Mn,Ni)2共晶相的相变行为 [J] . 余文涛, 郝启堂, 王倩中国有色金属学报：英文版 . 2018,第010期
3. 6061铝基体上镍涂层热处理过程中Ni-Al金属间化合物的形成机理 [J] . Mohsen ADABI, Ahmad Ali AMADEH 中国有色金属学报（英文版） . 2015,第012期
4. 6061铝基体上镍涂层热处理过程中Ni-Al金属间化合物的形成机理 [J] . Mohsen ADABI, Ahmad Ali AMADEH 中国有色金属学报：英文版 . 2015,第012期
5. Interaction Between Eutectic Intermetallic Particles and Dispersoids in the 3003 Aluminum Alloy During Homogenization Treatments [J] . M. DEHMAS, E. AEBY-GAUTIER, ARCHAMBAULT Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2013,第2期

机译：3003铝合金均质化处理中共晶金属间化合物颗粒与弥散体之间的相互作用。
6. Intermetallic Phase Transformations during Low-Temperature Heat Treatment of Al/Ni Nanoparticles Synthesized within Thermally Evaporated Fatty Acid Films [J] . Chinmay Damle, Anamika Gopal, Murali Sastry Nano letters . 2002,第4期

机译：低温热处理热蒸发脂肪酸膜中合成的Al / Ni纳米粒子的金属间相变
7. Solid-state transformation of Fe-rich intermetallic phases in Al-5.0Cu-0.6Mn squeeze cast alloy with variable Fe contents during solution heat treatment [J] . Lin Bo, Zhang Weiwen, Zhao Yuliang, Materials Characterization . 2015,第Null期

机译：固溶热处理过程中Al含量变化的Al-5.0Cu-0.6Mn挤压铸造合金中富Fe金属间相的固相转变
8. Investigation of effect of ' 6-α' transformation during homogenization heat treatment on fracture of intermetallic particles in Al-Mn-Mg alloy [C] . ZHANG Yonghao, LIU Qing, HUANG Wenrong, International Conference on Energy and the Future of Heat Threatment and Surface Engineering . 2014

机译：均质化热处理过程中“6-α”转化对铝金属间颗粒骨折的影响
9. Evolution of aluminum iron silicide intermetallic particles during homogenization of aluminum alloy 6063. [D] . Claves, Steven R. 2005

机译：铝合金6063均质化过程中铝硅化铁金属间化合物颗粒的演变。
10. Evolution of Elevated-Temperature Strength and Creep Resistance during Multi-Step Heat Treatments in Al-Mn-Mg Alloy [O] . G. S. Wang, K. Liu, S. L. Wang 2018

机译：Al-Mn-Mg合金多步热处理过程中高温强度和耐蠕变性的演变
11. Characterization of intermetallic particles in aluminium alloy AA5083 series after recrystalization heat treatment [O] . Peter Octovia 2007

机译：再结晶热处理后铝合金AA5083系列中金属间化合物的表征

Investigation of effect of ' 6-α' transformation during homogenization heat treatment on fracture of intermetallic particles in Al-Mn-Mg alloy

摘要

著录项

相似文献

相关主题

期刊订阅