MEASUREMENTS OF THE SIRIUS 2 TELECOMMUNICATION SATELLITE ANTENNA

摘要

The Sirius 2 telecommunication satellite was build in France by Aerospatiale. As a subcontractor Saab Ericsson Space (SES) developed the telecommunication antenna for direct television broadcast. The satellite was successfully launched November 13, 1997.rnThree antennas were manufactured by SES: a quality model (QM), a flight model (FM1) and a flight spare (FM2). Each antennas consists of a 1.4 meter in diameter shaped main reflector fed by a shaped subreflector and a dual polarized feed horn. For the test of the antennas, spherical near-field antenna test ranges located at Ericsson Microwave System (EMW)/SES in Sweden and at the Technical University of Denmark (DTU) were used. Each of the three antennas was measured twice. Between the two measurements mechanical and thermal tests were performed.rnThe paper presents the measurements on the satellite antennas together with a discussion of the advantages of using the spherical near-field technique for this type of measurements.rnCompared to a far-field range the advantages are evident: At both SES and DTU a measurement distance of ten and six meters respectively were used on the indoor ranges. On a far-field range a measurement distance in the excess of 250 meters must be applied. To decrease the measurement time the near fields were only measured in a certain region on the near field sphere. The influence of this truncation will be discussed. Coordinate systems for the antennas were defined using mirror cubes. The RF measurements as well as the optical measurements on the cubes were performed without dismounting the antenna from the antenna positioner.rnThe radiation patterns are therefore precisely defined with respect to the coordinate systems of the cubes.