【24h】

PTL-and clock-pulse circuit driven novel shift register architecture

机译:PTL和时钟脉冲电路驱动的新型移位寄存器架构

获取原文
获取原文并翻译 | 示例

摘要

In this paper, low power and area efficient 16-bit SISO(Serial In Serial Out) shift register is proposed. In this proposed design, the master-slave flip-flops are replaced by pulsed latches called SSASPL(Static differential Sense-Amp Shared Pulsed Latch)in order to reduce the area and power consumption. The timing issue of the pulsed latch is overcome by generating multiple non-overlap delayed short pulsed clock signals instead of using single pulsed clock signal. The shift register is divided into sub shift registers to reduce the number of clock buffers. Two circuits of256-bitand a 16-bitshift register(driven by CMOS-AND based clock pulse generator) are also implemented for study and comparison with proposed design. The proposed 16-bit shift register is driven by PTL-AND based clock pulse generator and is implemented using CMOS 0.18μm technology in Cadence Virtuoso. The proposed 16-bit shift register using PTL-AND clock pulse circuit consumes 14% less power and 4% less area compared to CMOS-AND pulse generation circuit.
机译:本文提出了一种低功耗,高效率的16位SISO(串行输入串行输出)移位寄存器。在此提出的设计中,主从触发器被称为SSASPL(静态差分传感-Amp共享脉冲锁存器)的脉冲锁存器代替,以减小面积和功耗。通过生成多个非重叠的延迟短脉冲时钟信号而不是使用单个脉冲时钟信号,可以克服脉冲锁存器的时序问题。移位寄存器分为子移位寄存器,以减少时钟缓冲器的数量。还实现了两个256位和16位移位寄存器的电路(由基于CMOS-AND的时钟脉冲发生器驱动),以与所提出的设计进行研究和比较。拟议的16位移位寄存器由基于PTL-AND的时钟脉冲发生器驱动,并在Cadence Virtuoso中使用CMOS0.18μm技术实现。与CMOS-AND脉冲生成电路相比,使用PTL-AND时钟脉冲电路的拟议16位移位寄存器功耗降低了14%,面积减少了4%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号