首页> 外文会议>2013 International Conference on Circuits, Power and Computing Technologies >Energy Efficient Cluster based Mobility Prediction for Wireless Sensor Networks
【24h】

Energy Efficient Cluster based Mobility Prediction for Wireless Sensor Networks

机译:无线传感器网络基于节能集群的移动性预测

获取原文
获取原文并翻译 | 示例

摘要

Wireless Sensor Networks (WSN) is a collection of wireless sensor nodes forming a temporary network without using any established infrastructure or centralized administration. Sensor nodes are battery operated and may be mobile, critical issues is to reduce the energy conservation and prediction of node mobility to maximize the network lifetime by using limited network resources. In order to overcome these issues, in this paper we propose an Energy Efficient Cluster Based Mobility Prediction Routing Protocol (EECMPR) for WSNs using Kalman Filters. In this technique, the node with high weight is chosen as cluster head based on the parameters such as residual energy and transmission range. The cluster head collects the information from the nodes in its cluster and transmits the information to the sink. The position of each mobile sensor is carried at the respective nodes using Kalman filter which gives the State Update which consists of velocity, acceleration and position. This State Update is sent to the cluster head which will process the information and in turn will send it to sink. Before receiving the information from the cluster head, the sink would do prediction and compare the received results obtained from cluster head and the predicted result. Finally it will send data packets to the nodes after determining the position. By simulation results, we have shown that the proposed technique (EECMPR) minimizes the overhead and improves accuracy in predicting the position of the node.
机译:无线传感器网络(WSN)是形成临时网络的无线传感器节点的集合,而无需使用任何已建立的基础架构或集中式管理。传感器节点由电池供电,并且可能是移动的,关键问题是通过使用有限的网络资源来减少能源节约和节点移动性的预测,以最大化网络寿命。为了克服这些问题,在本文中,我们提出了使用卡尔曼滤波器的WSN的基于节能集群的移动性预测路由协议(EECMPR)。在这种技术中,基于诸如剩余能量和传输范围之类的参数,选择具有高权重的节点作为簇头。群集头从其群集中的节点收集信息,并将该信息传输到接收器。每个移动传感器的位置在各个节点处使用卡尔曼滤波器进行携带,该滤波器给出状态更新,该状态更新包括速度,加速度和位置。此状态更新将发送到群集头,群集头将处理信息,然后将其发送到接收器。在接收来自簇头的信息之前,接收器将进行预测并比较从簇头获得的接收结果和预测结果。最后,它将在确定位置后将数据包发送到节点。通过仿真结果,我们表明,所提出的技术(EECMPR)使开销最小化,并提高了预测节点位置的准确性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号