首页> 外文会议>2012 5th Global Symposium on Millimeter Waves. >Design of a novel triangular wideband microstrip slot antenna with band-notched characteristic
【24h】

Design of a novel triangular wideband microstrip slot antenna with band-notched characteristic

机译:具有带隙特性的新型三角形宽带微带缝隙天线的设计

获取原文
获取原文并翻译 | 示例

摘要

A new type of a triangular wideband slot antenna was proposed. The proposed antenna consisted of a triangular-fed microstrip and a triangular-wide slot. The slot was opened at the GND board and the feed was on the other side of the substrate. The triangular antenna size for design is length of 50 mm and height of 1 mm. In order to achieve band-notched characteristic, a aperture was loaded on the patch and the relatively position of the aperture was adjusted. By HFSS simulation software, the impedance bandwidth, radiation patterns were simulated. The results showed that the work bandwidth were over 2.3 GHz to 4.2 GHz except 3.5 GHz frequency. Thus the compact wideband band-notched antenna can be realized.
机译:提出了一种新型的三角宽带缝隙天线。拟议中的天线由一个三角形馈电微带和一个三角形宽槽组成。插槽在GND板上打开,进料在基板的另一侧。设计的三角形天线尺寸为长度为50毫米,高度为1毫米。为了获得带凹口的特性,在贴片上加载孔,并调节孔的相对位置。通过HFSS仿真软件,对阻抗带宽,辐射方向图进行了仿真。结果表明,除3.5 GHz频率外,工作带宽均在2.3 GHz至4.2 GHz以上。因此,可以实现紧凑的宽带带隙天线。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号