In the context that involves low and medium powers, boost-type converters have high performance and is therefore strongly recommended to work in regulated sources. However, without adequate control such converters eventually provide high levels of THD (Total Harmonic Distortion) and low power factor (pf). In this way, different authors validated the passivity-based control (PBC) applied to static converters. However, through these studies it was observed that the quality of results is associated with the input signal voltage. Thus, the insertion of the PLL (Phase-Locked Loop) is justified by the poor quality of networks in general. That is usually the power supply voltages are not purely sinusoidal and have very harmonic content. Thus, lower THD levels can be obtained by adding the PLL for imposing a sinusoidal reference signal to the input voltage.
展开▼
