PROCEDURE FOR THE PREPARATION OF A UREA PREPARED HYDRAINIC RESIN WITH A LOW LOW MOLF RATIO BETWEEN PREPARED AND UREA

摘要

Urea and formaldehyde are mixed in a mole ratio of about 1:2. The mixture is condensed for 30 minutes at a pH of 7.0 to 7.4 and a temperature between 80 DEG and 85 DEG C. The condensation is continued at a pH of 4.8 to 5.8 at the same temperature until the viscosity reaches values between 15 and 50 mPa.s. The mole ratio of urea to formaldehyde is adjusted to a value of 1:1.80 to 1:1.90 by adding urea. The condensation is continued under acidic conditions at the same temperature, until the viscosity reaches values of 35 to 80 mPa.s. At a pH of 5.8 to 6.5, the mole ratio of urea to formaldehyde is adjusted to a value between 1.0:1.0 and 1.0:1.30 by adding urea. The temperature is allowed to drop freely. When the temperature has dropped to below 50 DEG C., the pH is adjusted to a value of 7.0 to 8.0.