首页>
外国专利>
Water permeability resin pavement manner
Water permeability resin pavement manner
展开▼
机译:透水性树脂的铺装方式
展开▼
页面导航
摘要
著录项
相似文献
摘要
PURPOSE: To insure high water permeability by extrusively granulating ceramic matter material paste into a prescribed columnar shape and the like of a specific diameter, and mixing ceramic baked grains after baking with resin so as to construct it into a layer. ;CONSTITUTION: Ceramic matter material paste is extrusively granulated and baked into nearly fixed diameter in the range of 1-6mm and column or prism of main aspect ratio of 1-4. Next the ceramic baked grains are mixed with resin so as to construct it into a layer. Otherwise, the grain size of material paste is set 1.5-4mm, and the paste is extrusively granulated and baked into column or prism of main aspect ratio of 1-3, and the grains are mixed with resin so as to construct it into a layer. The water absorption of the ceramic baked grain obtained by baking is set under 5%, and the coefficient of permeability of permeable resin pavement constructed in layer is set over 4×10-1/cm/sec. Hereby, granulation efficiency of aggregate can be heightened, waste of aggregate can be eliminated by further enhancing water permeability, and massive feeling with excellent appearance can be insured.;COPYRIGHT: (C)1995,JPO
展开▼
机译:目的:通过将陶瓷物质材料糊料挤压成颗粒状并制成特定直径的圆柱状,并在树脂烘烤后将陶瓷烘烤颗粒与树脂混合以使其成层,以确保高透水性。 ;组成:将陶瓷质材料糊料挤出造粒并烘烤成直径在1-6mm范围内的几乎固定直径,且主纵横比为1-4的柱或棱镜。接下来,将陶瓷烤制的谷物与树脂混合,以将其构造成一层。否则,将原料糊料的粒度设定为1.5-4mm,然后将糊料挤出造粒并烘烤成主纵横比为1-3的圆柱或棱柱,然后将这些粒料与树脂混合,从而制成一层。通过烧成得到的陶瓷烧成颗粒的吸水率设定为5%以下,层状构造的透气性树脂路面的渗透系数设定为4×10 -1 Sup> / cm / sec。由此,可以提高骨料的造粒效率,可以通过进一步提高水的渗透性来消除骨料的浪费,并且可以确保具有优异外观的块状感觉。; COPYRIGHT:(C)1995,JPO
展开▼