"Lock steel body and key point sizes: 20,25,30,35,40,50,60e70".The model of lock of this patent, consists of a body of hardened steel surface (1) which is closed by two covers item (12) and (11).The body contains an internal mechanism composed of two spheres (9), an actuator (8), a cylinder (6), an elastic ring (7), a castle (2), a spring triggering rod (10),Eight pins secret (3), eight against pins (4), and eight springs (5) and extremly, a rod (14), and two keys (13).The hardened steel body surface (1) and covered at the upper part, a cap of hardened steel surface (11) in the lower part of a lid of hardened steel surface (12),Internally this body (1) has a mechanism that works with the introduction of the key point (13) in the channel of the cylinder (6) which in turn presses the eight pins Secrets (3) that push the eight contrThe pins (4) which compresses the eight springs (5) from that moment is done the unlocking of the cylinder (6) with the castle (2) and thus it is possible to turn the key and make the drive balls (9) P.Or turn off the rod (14) which is driven to the outside of the body by the spring (10).To close the lock is necessary to keep the key point (13) introduced into the cylinder (6) in the position of 90 degrees from the start, press the shaft (14) of the body (1) hold.Turn the wrench in a counter clockwise direction until it stops spinning.
展开▼
