首页>
外国专利>
Infrared radiation emitting device for marking of aerial targets. (Machine-translation by Google Translate, not legally binding)
Infrared radiation emitting device for marking of aerial targets. (Machine-translation by Google Translate, not legally binding)
展开▼
机译:用于标记空中目标的红外辐射发射设备。 (通过Google翻译进行机器翻译,没有法律约束力)
展开▼
页面导航
摘要
著录项
相似文献
摘要
Infrared radiation emitting device for marking of aerial targets, so that the device can provide a short and medium distance target marking (up to 3-4 km) using an ir radiation source, emitting in one band narrow spectrum, compatible with the scanning band of the infrared guidance systems in anti-aircraft defense missiles and characterized by being constituted from a support element (1) formed by a thin and resistant sheet, of approximately 180 x 150 mm ., folded in two of its ends in the form of "L" with respective drills to house the corresponding anchor (2) and where on its internal face and perpendicular to it several cooling fins are noticed. on the external side there are several radiation emitting sources (4) connected by a connection cable (5) to a current stabilizer (6) connected to a 3.3 volt and 15.6 a/h battery., sufficient for a continuous use in operation of 30 minutes and where each radiation emitting source (4) is constituted by a prismatic body (8) that houses a parabolic reflecting element (10) and in its middle part a tungsten filament, all closed by a resistant glass (11), appreciating in the rear part of the set the power input. (Machine-translation by Google Translate, not legally binding)
展开▼
机译:红外辐射发射设备,用于标记空中目标,因此该设备可以使用红外辐射源在一个波段内窄光谱范围内进行短距离和中距离目标标记(最长3-4 km),与防空导弹的红外制导系统,其特征在于,由支撑元件(1)构成,该支撑元件由厚度约为180 x 150 mm的薄且坚固的薄板形成,并在其两端折叠成“ L”形用相应的钻头来容纳相应的锚固件(2),并在其内表面垂直于其的位置注意到几个散热片。在外侧,有多个辐射源(4)通过连接电缆(5)连接到电流稳定器(6),该电流稳定器连接到3.3伏和15.6 a / h电池,足以连续使用30个分钟,其中每个辐射发射源(4)由装有抛物面反射元件(10)的棱柱体(8)组成,在其中间部分由钨丝构成,钨丝均被电阻玻璃(11)封闭,在设置电源输入的后部。 (通过Google翻译进行机器翻译,没有法律约束力)
展开▼