首页> 外国专利> Method for controlling external station of an electric device mounted in a housing with forced air circulation and the external station of an electric device mounted in a housing with forced air circulation

Method for controlling external station of an electric device mounted in a housing with forced air circulation and the external station of an electric device mounted in a housing with forced air circulation

机译:用于通过强制空气循环控制安装在壳体中的电气设备的外部站的方法和通过强制空气循环控制安装在壳体中的电气设备的外部站的方法

摘要

the object of the application is a control station (1) external electrical equipment (2) fitted in a housing (3) with forced air circulation and an external station (1) of electraimmune system disorders (2) fitted in a housing (3) with forced air circulation.the declaration applies to the electrical equipment of pru0105dowych generators, but can be used also for the transformatorowych after suitable adaptation of its elements.a control station (1) external electrical equipment (2) fitted in a housing (3) with forced air circulation is thatthat work electric machine (2) in the form of a generator unit (2) controls indirectly examining temperature inside the enclosure (3),while advantageously achieve a lower limit temperaturein an applied field tolerance brings the fan module (4) located inside the cooling enclosure (3) air and possibly psychic refrigerating or heat sink (5) of the engine (6) of (2)"), and the upper tolerance limit causes the exclusion, positive instantaneous or generator unit (2 ') or station (1) under load.in addition, measures the speed of the air stream by a housing (3), on its way from the inlet sampling probe (7) in the tubes (8), whereby the housing (3) and placed in the condensing unit (2 '),the measured values in the conditions of the smooth flow of air stream in the test mode, remembers as size standard for the instantaneous average temperature inside the set,a mode measured current velocity of the air stream is compared with the memorized velocity obtained for the same temperature.as currently prevailing inside the enclosure (3) instantaneous high temperature.then calculated the difference the speedwhere the difference results obtained in terms of flow speed mode test is the basis to generate the additional control signal or steruju0105co - information or informacyjnegoin which, depending on the form of the signal respectively controls the air stream flowing through the housing to at least (3) or at least locally or remotely to the anomalyat the same time, advantageously changing conditions or operating parameters of the aggregation generator (2 ').measured meter (9) wind force placed in independent bilaterally open tunnel (10) having first (11) in the wall (12) housing (3).
机译:本申请的目的是将控制站(1)安装在具有强制空气循环的外壳(3)中的外部电气设备(2)和安装在外壳(3)中的免疫系统异常(2)的外部站(1)该声明适用于pr u0105dowych发电机的电气设备,但在适当修改其元件后也可用于变矩器。控制站(1)安装在外壳中的外部电气设备(2) 3)具有强制空气循环的功能是,发电机(2)形式的工作电机(2)控制间接检查外壳(3)内部的温度,同时有利地在施加的磁场公差下实现下限温度,从而使风扇模块(4)位于冷却室(3)的内部,以及(2)“)的发动机(6)的空气以及可能的精神制冷或散热片(5),并且公差上限导致排他,瞬时或一般负载下的Torr单元(2')或工位(1)。此外,在从管道(8)中的入口采样探头(7)的途中,通过外壳(3)测量气流的速度,从而外壳(3)并放置在冷凝单元(2')中,在测试模式下气流平稳流动的条件下的测量值,记住设备内部瞬时平均温度的尺寸标准将气流的当前速度与在相同温度下获得的存储速度进行比较(如当前在外壳内部当前普遍存在的瞬时温度(3)),然后计算速度差,其中根据流速模式测试获得的差结果为产生额外的控制信号或信息的基础,信息或信息根据信号的形式分别控制流过壳体的气流至少(3)或至少局部或远离异常同时,有利地改变聚集发生器(2')的条件或操作参数。测量的仪表(9)风力置于壁(12)的壳体(3)中具有第一(11)的独立的双向开口隧道(10)中。 )。

著录项

相似文献

  • 专利
  • 外文文献
  • 中文文献
获取专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号