Development and in vitro evaluation of a clobetasol 17-propionate topical cream formulation

摘要

One of the primary contributing factors to the escalating costs of health care is the high cost of innovator pharmaceutical products. As a consequence, health authorities in various countries and in particular in the developing world have identified generic prescribing and generic substitution as possible strategies to contain the escalating costs of health care provision. There is therefore a need for formulation scientists in developing countries to invest more time in the research and development of generic formulations. Clobetasol 17-propionate (CP) generic cream formulations containing 0.05% w/w of the drug were manufactured and characterized using in vitro testing. Formulation development studies were preceded by the development and validation of an RP-HPLC with UV detection for the quantitation and characterization of CP in innovator and generic cream formulations during formulation development and assessment studies. Furthermore the in vitro release ates of CP release from innovator and generic cream formulations were monitored using a validated in vitro release test method developed in these studies. The formulation of CP cream products was accomplished using a variety of commercially available mixed primary emulsifiers, such as Estol® 1474, Ritapro® 200, Emulcire® 61 WL and Gelot® 64. Successful formulations were selected based on their ability to remain physically stable immediately after manufacture and for 24 hours after storage at room temperature (22°C). Estol® 1474 was found to produce an unstable cream and was therefore not investigated further. The other three emulgents produced stable creams, but only the in vitro release profile of CP from a cream manufactured to contain Gelot® 64 was found to be statistically similar to that of the innovator formulation. Therefore the cream containing Gelot® 64 was selected as the most appropriate prototype generic cream formulation and was characterized in vitro in terms of CP content, viscosity, pH and in vitro release rate. Data generated from these studies were compared to those of the innovator product, Dermovate® cream, using statistical methods. The CP content, pH and in vitro release rate data of the CP formulation were similar to those of the innovator product, however the intrinsic viscosity of Dermovate® cream was almost three (3) times greater than the intrinsic viscosity of the test formulation developed using Gelot® 64. The CP cream formulation developed in these studies was stored for 4 weeks at 40 ± 2°C and 25 ± 5% RH in an incubator and the formulation was found to be stable. A formulation has been developed and assessed and found to be suitable for use as a topical semi-solid dosage form for CP.