首页> 外文OA文献 >Reynolds-Averaged Navier-Stokes Simulations of Two Partial-Span Flap Wing Experiments
【2h】

Reynolds-Averaged Navier-Stokes Simulations of Two Partial-Span Flap Wing Experiments

机译:两个部分跨度襟翼机翼实验的雷诺平均Navier-Stokes模拟

摘要

Structured Reynolds Averaged Navier-Stokes simulations of two partial-span flap wing experiments were performed. The high-lift aerodynamic and aeroacoustic wind-tunnel experiments were conducted at both the NASA Ames 7-by 10-Foot Wind Tunnel and at the NASA Langley Quiet Flow Facility. The purpose of these tests was to accurately document the acoustic and aerodynamic characteristics associated with the principle airframe noise sources, including flap side-edge noise. Specific measurements were taken that can be used to validate analytic and computational models of the noise sources and associated aerodynamic for configurations and conditions approximating flight for transport aircraft. The numerical results are used to both calibrate a widely used CFD code, CFL3D, and to obtain details of flap side-edge flow features not discernible from experimental observations. Both experimental set-ups were numerically modeled by using multiple block structured grids. Various turbulence models, grid block-interface interaction methods and grid topologies were implemented. Numerical results of both simulations are in excellent agreement with experimental measurements and flow visualization observations. The flow field in the flap-edge region was adequately resolved to discern some crucial information about the flow physics and to substantiate the merger of the two vortical structures. As a result of these investigations, airframe noise modelers have proposed various simplified models which use the results obtained from the steady-state computations as input.
机译:进行了两个部分跨度襟翼机翼实验的结构化雷诺平均Navier-Stokes模拟。在NASA Ames 7×10英尺风洞和NASA Langley Quiet Flow Facility上进行了高升力空气动力学和空气声学风洞实验。这些测试的目的是准确记录与主要机身噪声源(包括襟翼侧缘噪声)相关的声学和空气动力学特性。进行了特定的测量,这些测量可以用于验证噪声源和相关空气动力学的分析和计算模型,以用于近似于运输机飞行的配置和条件。数值结果既可用于校准广泛使用的CFD代码CFL3D,又可用于获得无法从实验观察中识别出的襟翼侧边缘流动特征的详细信息。通过使用多个块结构的网格,对两个实验设置进行了数值建模。实现了各种湍流模型,网格块接口交互方法和网格拓扑。两种模拟的数值结果与实验测量结果和流动可视化观察结果非常吻合。襟翼边缘区域中的流场已得到充分解析,以辨别关于流物理学的一些关键信息并证实两个涡旋结构的合并。这些研究的结果是,飞机噪声建模者提出了各种简化模型,这些模型使用从稳态计算中获得的结果作为输入。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号