首页> 外文OA文献 >Study on Distribution Characteristics and Displacement Mechanism of Microscopic Residual Oil in Heterogeneous Low Permeability Reservoirs
【2h】

Study on Distribution Characteristics and Displacement Mechanism of Microscopic Residual Oil in Heterogeneous Low Permeability Reservoirs

机译:非均相低渗透储层中微观剩余油分布特性和位移机理研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In order to explore the development methods suitable for heterogeneous low permeability reservoirs and study the distribution characteristics of residual oil, photoetched glass and artificial core models with three permeability ratios of 1, 6, and 9 were prepared in this research. Three displacement schemes including polymeric surfactant flooding, polymeric surfactant with binary flooding, and binary flooding were designed at the same expenses to obtain the displacement mechanism of various residual oil saturations. The results show that the best displacement efficiency can be achieved by polymeric surfactant flooding, followed by polymeric surfactant with binary flooding, and binary flooding for the models with the same permeability ratio. Binary flooding mainly activates cluster and oil drop residual oils, polymeric surfactant with binary flooding mainly activates cluster, oil film, and column residual oils, whereas polymeric surfactant flooding mainly activates cluster, oil drop, and column residual oils. In addition, with the increase of the model permeability ratio, the recovery ratio of water flooding decreases, whereas the enhanced oil recovery and the variations in residual oil saturation gradually increase after carrying out different displacement measures. The viscoelastic and shearing effects of the polymeric surfactant flooding system can better displace the residual oil, assisting in the further development of heterogeneous low permeability reservoirs.
机译:为了探讨适用于异质低渗透储存器的开发方法,研究残留油的分布特性,在本研究中制备了具有三个渗透率的三种渗透率的储存玻璃和人工核心模型。三种位移方案包括聚合物表面活性剂泛滥,具有二进制洪水的聚合物表面活性剂,以及二进制洪水的相同费用,以获得各种残留油饱和的位移机理。结果表明,最佳的位移效率可以通过聚合物表面活性剂泛滥,然后具有二元洪水的聚合物表面活性剂,以及具有相同渗透率的模型的二进制洪水。二进制洪水主要激活簇和油滴残留油,具有二进制洪水的聚合物表面活性剂主要激活簇,油膜和柱残留油,而聚合物表面活性剂洪水主要激活簇,油滴和柱残留的油。此外,随着模型渗透率的增加,水淹的回收率降低,而在进行不同的位移措施后,增强的采油和剩余油饱和度的变化逐渐增加。聚合物表面活性剂驱油系统的粘弹性和剪切效果可以更好地移动残留油,协助异质低渗透储存器的进一步发展。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号