DECADE RESISTORS 1.0 TO 100,000 OHMS PER STEP

摘要

This procedure describes the calibration of decade resistors, a partial list of which is given below. The instrument under calibration will be referred to herein as the Test Instrument.n1.2 This procedure will verily correct performance ofnthe Test Instrument within the required tolerances. Normally, each recorded value will be compared to its tolerance and corrective action taken, if required, before continuing the test. However, it is sometimes desirable to delay the verification and corrective action until several related values have been recorded. Perform corrective action in accordance with the instruction manual and local laboratory practices. All data must be recorded on the Calibration Report form.n1.3 Read the entire procedure before starting the calibration.