The system consists of a mechanical handler, measurement instruments, and a dedicated computer. System operation is monitored and controlled while the pro¬duct is being measured. Five case dimensions are measured by an electro-optical system using diode arrays to measure a case image at unity magnification. By scan averaging, measurement standard deviations as small as 2.5 microns are obtained at a throughput of 1200 cases per minute. Measurements made with the system fall within the uncertain-ties of hand-gauged values for the same cases. Four zones on each case are examined for surface flaws, such as dents and scratches, by detecting light scattered from the surface. The system can detect these surface flaws at inspection rates of 1200 cases per minute. Using electro-optic methods, two additional measuring stations detect vent hole presence and gross size deviations to prevent mechanical jams.
展开▼