Disposal of Activated Fusion Wall Materials

摘要

We have used NRC's low-level waste disposal regulation (10CFR61) to classify activated fusion reactor structural materials. The limits set by the NRC in 10CFR61 will require extremely expensive steels with degraded properties, even when the limits are adjusted to give credit for use of an expensive hot waste disposal facility. Both the expense and the poorer properties could have a negative impact on reactor safety, thus subverting the overall goals of the NRC family of regulations. Following this initial study, we have examined the methodology used by the NRC to set waste concentration limits. For a long-lived gamma emitter like exp 94 Nb, direct gamma dose to an intruding home builder dominates the limit setting process. Of all the tests applied to the waste, the controlling test which sets the lowest limit ignores all the engineered intrusion barriers which are themselves required by the same regulation. If even a small fraction of the barriers remain intact (an extremely likely event), the exp 94 Nb limit could be increased from the 0.2 Ci/m exp 3 in 10CFR61 to 1100 Ci/m exp 3 without exceeding the limits set for personnel exposure. Similarly, cautious application of the 10CFR61 methodology to other radioisotopes of interest to fusion designers will result in limits which are more in line with the unique nature of fusion energy. (ERA citation 08:053727)