Zero-Flux Planes, Flux Reversals and Diffusion Paths in Ternary and Quaternary Diffusion

摘要

During isothermal multicomponent diffusion, interdiffusion fluxes of individual components can go to zero at zero-flux planes (ZFP) and exhibit flux reversals from one side to the other of such planes. Interdiffusion fluxes as well as the locations and compositions of ZFPs for components are determined directly from the concentration profiles of diffusion couples without the need for prior knowledge of interdiffusion coefficients. The development and identification of ZFPs is reviewed with the aid of single phase and two-phase diffusion couples investigated in the Cu-Ni-Zn system at 775 sup 0 C. ZFP locations in the diffusion zone nearly correspond to sections where the activity of a component is the same as its activity in either of the terminal alloys of a couple. Path slopes at ZFPs are uniquely dictated by the atomic mobility and thermodynamic data for the components. Discontinuous flux reversals for the components can also occur at interfaces in multiphase couples. Identification of ZFPs is also presented for diffusion in the Cu-Ni-Zn-Mn quaternary system. Analytical representation of diffusion paths for both ternary and quaternary diffusion couples is presented with the aid of characteristic path parameters. (ERA citation 11:034265)