Laser Interferometric Dilatometer for Low-Expansion Materials.

摘要

The development of a high-precision dilatometer based on interferometry presents a number of challenges. This paper describes a laser interferometric dilatometer developed for high-precision thermal expansion measurements in the materials laboratory. The Sandia dilatometer uses dual-beam laser interferometry with a computer-controlled optical alignment feature to achieve high-precision length change measurements. This device has been modified to expand its measurement capabilities in a number of areas. A new thermal chamber has been incorporated which provides a range of measurement from 90 to 500 K while minimizing thermal effects on the optical portion of the instrument. A new specimen holder has been developed to cover this temperature range while accommodating a wider variety of specimen types. In particular, thin (1 mm) composites may be employed in the holder, which uses a single specimen, with only modest shape and preparation requirements, to provide absolute length change measurements. Tilt errors limit the overall performance of dilatometers based on dual-beam interferometry. Significant improvements in precision were demonstrated by incorporating a unique optical system which independently measures specimen holder tilt; tilt errors were corrected and a length change resolution near 0.4 microstrain was achieved. Expansion coefficient data obtained with the device agreed with established results on fused silica, platinum, and stainless steel. New expansion data were obtained from 90 to 293 K on stainless steel, NBS Standard Reference Material 738. (ERA citation 13:044317)