Preliminary lightning tests: Optical fiber penetration of an exclusion region barrier.

摘要

As part of the Direct Optical Initiation (DOI) program, an assessment of the possibility of introducing lightning energy into an exclusion region via an Optical Barrier Feedthrough (OBF) is being carried out. One postulated penetration mechanism is the tracking of current past the OBF on the surface of the dielectric optical fiber itself. During September and October of 1991, a series of tests was conducted on a closed metallic cylindrical test object representing the electrical exclusion region of a weapon. Median-level (30-kA) and severe (200-kA) simulated lightning return strokes, singly, doubly, and in combination with a moderate continuing current, were attached directly to the exterior portion of a fiber optic cable, which penetrated through a hole of controlled size into the interior of the exclusion region. The thickness of the barrier surrounding the hole was 0.06 in. Attempts were made to measure any conducted current flowing on the fiber at distances of 1 and 4 inches from the interior surface of the stainless steel top of the cylinder. Test parameter variations included diameter of the penetration hole (475 and 500 microns), length of the exterior portion of the cable and whether or not its jacket was present, and the applied test currents. It is concluded that no signal above measurement noise was recorded on any of the data shots that made up the test series. Measurement resolution was of the order of several amperes. Based on the highest recorded response of 8.5 A, corresponding to a 200-kA input, the OBF can be characterized by a direct-strike lightning attenuation factor of approximately 5 (times) lO(sup (minus)5) or better. Based on the more typically observed noise level of a few amps, the attenuation is commensurately greater.