Non-Polluting Composites Repair and Remanufacturing for Military Applications: Co-Injection Resin Transfer Molding

摘要

Vacuum-assisted resin transfer molding (VARTM) processes have been proven to be cost-effective manufacturing techniques for large composite structures. Significant environmental cost savings are possible by replacing currently practiced sequential repair and manufacturing techniques with reduced-step co-cure processes enabled by the co-injection resin transfer molding (CIRTM) variant of the VARTM process. The CIRTM process was investigated to manufacture two dual-layered structures commonly required in Department of Defense (DoD) structures. The first consists of a vinyl-ester layer for structural integrity and a phenolic layer for flammability, smoke, and toxicity (FST) protection. The second consists of structural epoxy with a polyurethane layer for improved damage tolerance. In each case, the two resins are simultaneously injected into a mold filled with a stationary fiber bed and co-cured. Resin separation is maintained by a 1-mil-thick polysulfone film sandwiched between two layers of 6.5-mil-thick adhesive. Various tests have been performed to demonstrate mechanical, thermal, and rate-dependent performance of the improved structures.