Large Reference Displacement Analysis of Composite Plates. Part 2: ComputerImplementation

摘要

This investigation concerns itself with the computer implementation of thedynamic formulation of thin laminated composite plates consisting of layers of orthotropic laminae that undergo large arbitrary rigid body displacements and small elastic deformations. A finite element preprocessor computer program is developed to automatically generate the invariants of the laminae, which may have arbitrary orientations. The laminae invariants are then used to obtain the invariants of the elements and the composite laminated plate. The consistent and lumped mass formulations of the invariants of motion of composite plates are compared and it is concluded that the two methods are comparable, if a fine enough finite element mesh is used. The structure of the dynamic equations of motion, based on the formulation presented in Part I of this paper, is examined. Non-linear centrifugal and Coriolis forces arising as the result of the finite rotations of the laminae are defined, and the solution schemes of the resulting non-linear differential equations of motion are discussed. Numerical examples illustrating the differences between homogeneous isotropic and laminated composite plates are presented. An RSSR (Revolute-Spherical-Spherical-Revolute) mechanism is used in the numerical examples, with the coupler modelled as a laminated plate flexible body. It is found that the inertia of the plate contributed greatly to the transverse deformation. The effects of laminae orientation is also investigated.