...
首页> 外文期刊>Physics in medicine and biology. >Computational simulation of breast compression based on segmented breast and fibroglandular tissues on magnetic resonance images.
【24h】

Computational simulation of breast compression based on segmented breast and fibroglandular tissues on magnetic resonance images.

机译:基于磁共振图像上分割的乳房和腓肠组织的乳房压缩的计算模拟。

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

This study presents a finite element-based computational model to simulate the three-dimensional deformation of a breast and fibroglandular tissues under compression. The simulation was based on 3D MR images of the breast, and craniocaudal and mediolateral oblique compression, as used in mammography, was applied. The geometry of the whole breast and the segmented fibroglandular tissues within the breast were reconstructed using triangular meshes by using the Avizo 6.0 software package. Due to the large deformation in breast compression, a finite element model was used to simulate the nonlinear elastic tissue deformation under compression, using the MSC.Marc software package. The model was tested in four cases. The results showed a higher displacement along the compression direction compared to the other two directions. The compressed breast thickness in these four cases at a compression ratio of 60% was in the range of 5-7 cm, which is a typical range of thickness in mammography. The projection of the fibroglandular tissue mesh at a compression ratio of 60% was compared to the corresponding mammograms of two women, and they demonstrated spatially matched distributions. However, since the compression was based on magnetic resonance imaging (MRI), which has much coarser spatial resolution than the in-plane resolution of mammography, this method is unlikely to generate a synthetic mammogram close to the clinical quality. Whether this model may be used to understand the technical factors that may impact the variations in breast density needs further investigation. Since this method can be applied to simulate compression of the breast at different views and different compression levels, another possible application is to provide a tool for comparing breast images acquired using different imaging modalities--such as MRI, mammography, whole breast ultrasound and molecular imaging--that are performed using different body positions and under different compression conditions.
机译:这项研究提出了一个基于有限元的计算模型,以模拟受压情况下乳房和纤维腺组织的三维变形。该模拟基于乳房的3D MR图像,并应用了乳腺X线照相中所用的颅尾和中外侧斜向压缩。使用Avizo 6.0软件包,使用三角形网格重建整个乳房的几何形状以及乳房内分割的纤维腺组织。由于乳房受压时变形较大,因此使用MSC.Marc软件包使用有限元模型来模拟受压情况下的非线性弹性组织变形。该模型在四种情况下进行了测试。结果表明,与其他两个方向相比,沿压缩方向的位移更高。在这四种情况下,以60%的压缩率压缩的乳房厚度在5-7厘米范围内,这是乳房X线照片中的典型厚度范围。与两个女人的相应乳房X光照片相比,压缩率为60%的纤维腺组织网的投影,显示出空间匹配的分布。但是,由于压缩是基于磁共振成像(MRI)进行的,因此磁共振成像(MRI)的空间分辨率比乳房X线照片的面内分辨率大得多,因此该方法不太可能生成接近临床质量的合成乳房X线照片。该模型是否可用于了解可能影响乳房密度变化的技术因素,还需要进一步研究。由于此方法可用于模拟不同视角和不同压缩水平下的乳房压迫,因此另一种可能的应用是提供一种工具,用于比较使用不同的成像方式(例如MRI,乳腺X射线摄影,全乳超声和分子成像)采集的乳房图像成像-使用不同的身体位置并在不同的压缩条件下执行。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号