首页> 外文期刊>Petroleum Science and Technology >Numerical Simulation of Surfactant Flooding in Darcy Scale Flow
【24h】

Numerical Simulation of Surfactant Flooding in Darcy Scale Flow

机译:Darcy尺度流中表面活性剂驱的数值模拟

获取原文
获取原文并翻译 | 示例
           

摘要

One of the methods that is used nowadays in enhanced oil recovery is surfactant flooding. The main mechanisms of surfactant flooding in reservoir consist of reduction of interfacial tension between water and oil and modification of rock wettability. In this study, the authors simulate the surfactant injection process in Darcy scale and in one-dimensional, multicomponent, multiphase state, and effects of physical phenomena such as adsorption, dispersion, convection, and exchange between fluids and solids are considered. Wettability alteration of reservoir rock due to presence of surfactant in injected fluid is detected in relative permeability and capillary pressure curves. First, the authors express the governing flow equations in the system and then discretize them. The variables consist of water and oil saturations, surfactant concentration in water phase, water and oil pressures, and velocities in each block. Second, the discretized equations are solved by IMPES method and pressure and saturation variables are calculated and after that, the concentration of surfactant in water phase is calculated. Finally, results of simulation are shown.
机译:如今,用于提高油采收率的方法之一是表面活性剂驱油。储层表面活性剂驱的主要机理包括降低水油界面张力和改变岩石的润湿性。在这项研究中,作者模拟了达西规模和一维,多组分,多相状态的表面活性剂注入过程,并考虑了诸如吸附,分散,对流以及流体与固体之间交换等物理现象的影响。在相对渗透率和毛细管压力曲线中检测到由于注入流体中存在表面活性剂而引起的储层岩石的润湿性变化。首先,作者在系统中表达控制流方程,然后离散化它们。这些变量包括水和油的饱和度,水相中表面活性剂的浓度,水和油的压力以及每个区块中的速度。其次,用IMPS方法求解离散方程,计算压力和饱和度变量,然后计算水相中表面活性剂的浓度。最后,显示了仿真结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号