Isothermal Microcalorimetry of pressurized systems I: A rapid method to evaluate pressurized metered dose inhaler formulations

摘要

Purpose: The techniques available to study formulation stability in pressurized metered dose inhalers (pMDIs) are limited, due to the challenging conditions of working with high pressure propellants. Isothermal microcalorimetry is a valuable tool used to screen and aid in formulation development of solid and solution drug formulations; however there are currently no available methods to evaluate pMDIs. In this paper, we have developed a method that allows measurement of such pressurized systems.Methods: Samples were prepared by cold filling ampoules with propellant (HFA 134a) and drugs of interest. Ampoule caps were fitted with a specific O-ring, coated with paraffin and pre-conditioned prior to measurement. Samples were equilibrated at 25°C, placed in a Thermal Activity Monitor III (TAM III) system and measured isothermally at 25°C for a period of at least 24 h.Results: Using well-defined procedures and ampoule preparation techniques we were able to safely contain the volatile propellant and acquire a stable measurement baseline. We were able to rapidly determine, within 6 h, the physical stability of amorphous and crystalline drug forms of beclomethasone dipropionate and formoterol fumarate dihydrate when formulated with HFA 134a.Conclusions: Isothermal microcalorimetry in pressurized HFA propellant systems was shown to be a rapid screening tool to evaluate pMDI formulation physical stability. This method can potentially be applied to study pMDI formulation factors to expedite product development.