...
首页> 外文期刊>Biomaterials >Subcutaneous microfabricated surfaces inhibit epithelial recession and promote long-term survival of percutaneous implants.
【24h】

Subcutaneous microfabricated surfaces inhibit epithelial recession and promote long-term survival of percutaneous implants.

机译:皮下微加工表面抑制上皮退缩并促进经皮植入物的长期存活。

获取原文
获取原文并翻译 | 示例

摘要

The long-term success of percutaneous devices is compromised by problems such as infection, mechanical avulsion and epithelial downgrowth. The objective of this study was to test the effects of microfabricated surfaces on tissue integration and long-term survival of percutaneous implants, using a modified implant design and a two-stage surgical method. Hexagonal titanium-coated epoxy implants were constructed with separate subcutaneous and percutaneous components, so that the effects of surface topography on connective tissue could be separated from the effects on epithelium. Subcutaneous components with 30-microm-deep micromachined grooves, 120-microm-deep tapered pits, or smooth control surfaces were secured to the calvarial bone of rats by a titanium pin. After 8 weeks, a percutaneous smooth-surfaced component was secured to the subcutaneous component. Dental impression materials were used to make models of the components and adjacent tissues at weekly intervals and tissue recession around the implants was measured. Some implants were removed at intervals up to 24 weeks and processed for histology. Connective-tissue ingrowth and mineralized tissue were noticed on the micromachined surfaces, whereas a thick capsule and epithelial downgrowth were observed on smooth control surfaces. On all implants, recession occurred most rapidly in the first 3 weeks, but was significantly reduced relative to the smooth controls only on implants with micromachined grooved subcutaneous surfaces (p<0.05). In addition, the time before failure was significantly (p<0.05) longer for implants with grooved subcutaneous surfaces than implants with smooth and pitted subcutaneous surfaces. This study indicated that an impression technique could be used to monitor tissue recession on percutaneous devices, and that micromachined grooved surfaces located subcutaneously improved the performance and longevity of percutaneous devices by promoting tissue integration.
机译:经皮器械的长期成功受到感染,机械撕脱和上皮下垂等问题的影响。这项研究的目的是使用改良的植入物设计和两阶段手术方法,测试微细加工表面对经皮植入物的组织整合和长期存活的影响。六角形钛涂层环氧植入物由皮下和经皮分开的部件构成,因此可以将表面形貌对结缔组织的影响与对上皮的影响分开。通过钛针将具有30微米深的微加工凹槽,120微米深的锥形凹坑或光滑的对照表面的皮下组件固定在大鼠的颅骨上。 8周后,将经皮光滑表面的组件固定至皮下组件。每周使用牙科印模材料制作组件和相邻组织的模型,并测量植入物周围的组织凹陷。每隔24周就取出一些植入物,并进行组织学处理。在微机械加工的表面上观察到结缔组织向内生长和矿化的组织,而在光滑的对照表面上观察到厚的囊膜和上皮的向下生长。在所有植入物上,后三周内衰退最迅速,但相对于仅具有微机械加工沟槽式皮下表面的植入物,平滑控制明显减少(p <0.05)。此外,具有凹槽的皮下表面的植入物的失效前时间比具有光滑且有凹痕的皮下表面的植入物的失效前时间明显更长(p <0.05)。这项研究表明,压印技术可用于监测经皮设备上的组织退缩,并且位于皮下的微机械开槽表面通过促进组织整合提高了经皮设备的性能和寿命。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号