【24h】

Toward GW/year of CIGS production within the next decade

机译:未来十年内将达到GW / CIGS年产量

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

A detailed study carried out in 1996-1997 showed that manufacturing cost of crystalline silicon PV modules could be lowered to 1 ECU/Wp when the c-Si annual module production level reaches 500 MWp while an annual production of only 60 MWp would lower production cost of thin-film PV modules to 0.6 ECU/Wp. During 1976-2003, the PV module price has followed the 80% learning curve with cumulative production volume. However, the price reduction has slowed since because of the polysilicon supply problem. Because of their high potential for improvement, thin-film PV and especially copper (Cu)-indium (In)-gallium (Ga)-selenide (Se)-sulfide (GIGS) technology have the potential for growing at the fastest rate and consequently not only to complement the lagging c-Si PV production but also to assist in following the 80% learning curve. This paper reviews the CIGS PV manufacturing processes in comparison to those of other PV technologies and predicts that annual production volume of CIGS thin-film PV modules will exceed 1 GW/year within the next 10 years. (c) 2007 Elsevier B.V. All rights reserved.
机译:1996-1997年进行的详细研究表明,当c-Si年模块生产水平达到500 MWp时,晶体硅光伏模块的制造成本可降低至1 ECU / Wp,而仅60 MWp的年产量将降低生产成本薄膜光伏模块的数量达到0.6 ECU / Wp。 1976-2003年间,光伏组件价格跟随80%的学习曲线,并具有累计产量。但是,由于多晶硅的供应问题,价格下降的速度已经放慢了。由于薄膜光伏技术的巨大改进潜力,尤其是铜(Cu)-铟(In)-镓(Ga)-硒化物(Se)-硫化物(GIGS)技术具有以最快的速度发展的潜力,因此不仅可以补充落后的c-Si PV产量,而且可以帮助遵循80%的学习曲线。与其他光伏技术相比,本文回顾了CIGS光伏制造工艺,并预测在未来10年内,CIGS薄膜光伏组件的年产量将超过1 GW /年。 (c)2007 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号