首页> 外文期刊>Optica applicata >Silica-based versus silica-titania sol-gel materials - comparison of the physical properties: surface tension, gelation time, refractive index and optical transmittance
【24h】

Silica-based versus silica-titania sol-gel materials - comparison of the physical properties: surface tension, gelation time, refractive index and optical transmittance

机译:二氧化硅基和二氧化硅-二氧化钛溶胶-凝胶材料-物理性能比较:表面张力,胶凝时间,折射率和透光率

获取原文
获取原文并翻译 | 示例
           

摘要

Knowledge of the physical parameters and optical constants of sols and sol-gel materials is important in view of their possible applications. In this work, silica and silica-titania sols were examined. Gelation time, surface tension, refractive index and optical transmittance were measured. The sol-gel materials were produced from the silica precursor Si(OC2H5)(4) mixed with the titanium dioxide precursor Ti(OC2H5)(4) and 96% ethyl alcohol. It was stated that the surface tension of pure silica sols is much higher than in case of silica-titania sols. The refractive index of fresh samples is lower than of stored sols. The transmittance is highest for the fresh samples and it decreases with,,elation time; however, this effect is stronger for silica-titania materials. By manipulating with the solvent content and titania addition, the required refractive index may be obtained.
机译:考虑到其可能的应用,了解溶胶和溶胶-凝胶材料的物理参数和光学常数很重要。在这项工作中,检查了二氧化硅和二氧化硅-二氧化钛溶胶。测量胶凝时间,表面张力,折射率和透光率。溶胶-凝胶材料是由二氧化硅前体Si(OC2H5)(4)与二氧化钛前体Ti(OC2H5)(4)和96%乙醇混合而成的。据指出,纯二氧化硅溶胶的表面张力比二氧化硅-二氧化钛溶胶的情况高得多。新鲜样品的折射率低于储存的溶胶。新鲜样品的透射率最高,并且随着时间的增加而降低;但是,这种效果对于二氧化硅-二氧化钛材料更强。通过控制溶剂含量和二氧化钛的添加,可以获得所需的折射率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号