【24h】

TG-FTIR ANALYSIS OF PINE SAWDUST PYROLYTIC KINETICS

机译:松木屑热解动力学的TG-FTIR分析

获取原文
获取原文并翻译 | 示例
           

摘要

The pyrolysis of certain pine sawdust was studied by thermogravimetric analyzer coupled with Fourier transform infrared spectroscopy (TG-FTIR). Different heating rates were applied to a final temperature of 950 °C. Total loss weights of 78%, 79% and 83% at heating rates of 20 °C/min, 40 °C/min and 80 °C/min, respectively, were observed, and the temperature trend of evolving gaseous products, such as CH4, H2O, CO and CO2, was investigated. The plot of the thermal decomposition rate curve leads to kinetic parameters, which were calculated by Kissinger's and Ozawa's methods; the activation energy of the substrate was of 130.14 and 133.21 kJ-mol~(-1), respectively, and the frequency factor, of 2.594x10~(11) and 3.143x10~(11) min~(-1). The results show that the above-mentioned methods successfully represent decompositon curves and fit the experimental data very well. Therefore, this study provides a simple way to evaluate the pyrolytic rate of biomass in a real combustor.
机译:通过热重分析仪结合傅里叶变换红外光谱法(TG-FTIR)研究了某些松木屑的热解。将不同的加热速率施加到950°C的最终温度。观察到在20°C / min,40°C / min和80°C / min的加热速率下的总失重分别为78%,79%和83%,并且不断发展的气态产物(例如研究了CH4,H2O,CO和CO2。热分解速率曲线的图给出了动力学参数,该动力学参数是根据基辛格和小泽的方法计算的;底物的活化能分别为130.14和133.21 kJ-mol〜(-1),频率因子为2.594x10〜(11)和3.143x10〜(11)min〜(-1)。结果表明,上述方法成功地表示了分解曲线,很好地拟合了实验数据。因此,这项研究提供了一种简单的方法来评估真实燃烧器中生物质的热解速率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号