首页> 外文期刊>RSC Advances >Effects of plasticizers on the strain-induced crystallization and mechanical properties of natural rubber and synthetic polyisoprene
【24h】

Effects of plasticizers on the strain-induced crystallization and mechanical properties of natural rubber and synthetic polyisoprene

机译:增塑剂对天然橡胶和合成聚异戊二烯的应变诱导结晶和力学性能的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Effects of liquid isoprene (LIR-50) and naphthenic oil (NPO) on the strain-induced crystallization ( SIC) measured by in situ synchrotron wide-angle X-ray diffraction (WAXD) and mechanical properties of vulcanized natural rubber (NR) and synthetic polyisoprene (IR) were studied. The onset strain (alpha(c)) of SIC of NR and IR was 250% and 350%, respectively. NR and IR exhibited stress upturns at strain 383% and 450% in stress-strain curves, and the crystallinities of NR and IR were 7.6% and 8.6%, respectively. After vulcanization, LIR-50 became part of the rubber network, while NPO still existed as free small molecules in rubber networks. After the respective addition of LIR-50 and NPO, the alpha(c) of NR composites rarely changed, while the ac of IR composites increased. In addition, the crystallinity and tensile strength of NR and IR filled with LIR-50 and NPO, respectively, decreased, and the reduction in IR composites was higher than that in NR composites. The crystallinity and mechanical properties of the NR and IR plasticized by LIR-50, respectively, were higher than those plasticized by NPO. The maintenance of high crystallinity of NR or IR composites may ensure their good mechanical properties. Therefore, LIR-50 can be used as a reactive plasticizer to maintain good mechanical properties for NR and IR.
机译:液态异戊二烯(LIR-50)和环烷油(NPO)对原位同步加速器广角X射线衍射(WAXD)测得的应变诱导结晶(SIC)和硫化天然橡胶(NR)的力学性能的影响研究了合成聚异戊二烯(IR)。 NR和IR的SIC的起始菌株(alpha(c))分别为250%和350%。在应力-应变曲线中,NR和IR在应变383%和450%处显示出应力上调,NR和IR的结晶度分别为7.6%和8.6%。硫化后,LIR-50成为橡胶网络的一部分,而NPO仍以自由小分子形式存在于橡胶网络中。分别加入LIR-50和NPO后,NR复合材料的α(c)几乎没有变化,而IR复合材料的ac增加。另外,分别用LIR-50和NPO填充的NR和IR的结晶度和拉伸强度降低,IR复合材料的还原度高于NR复合材料。 LIR-50增塑的NR和IR的结晶度和机械性能分别高于NPO增塑的。保持NR或IR复合材料的高结晶度可确保其良好的机械性能。因此,LIR-50可用作反应性增塑剂,以保持NR和IR的良好机械性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号