Repetitively pulsed high-current accelerators with transformer charging of forming lines

摘要

This article describes the principles of operation and the parameters of the SINUS setups designed at the Institute of High-Current Electronics, Siberian Division, Russian Academy of Science, over the period from 1990 to 2002. A characteristic feature of accelerators of the SINUS type is the use of coaxial forming lines (in particular, with a spiral central conductor) which are charged by a built-in Testa transformer to produce the accelerating high-voltage pulses. This ensures a reasonable compactness and long lifetime of the setups. The range of parameters of the SINUS setups is as follows: Voltage amplitude at the cathode: 200-2000 kV Electron beam current: 2-20 kA Equivalent load impedance: 30-180 Omega Accelerating pulse duration: 4-130 ns Pulse repetition rate: up to 400 Hz Pulse amplitude instability (RMS): 0.7-2.5% A number of setups of this type use a three-electrode controllable gas gap switch. This has made possible on-line electronic control (from pulse to pulse) of the output voltage pulse amplitude. The control band width delta = DeltaU/U-max was up to 75%. Studies have been performed on the lifetime of explosive-emission cathodes. At current densities of 25-30 A/cm(2), a Pulse duration of similar to20 ns, and a pulse repetition rate of 100 Hz, the metal-dielectric cathode in a planar geometry retained its emissivity within 10(8) pulses. The SINUS accelerators are traditionally employed for producing high-power microwave radiation in various systems with a coaxial electron beam in a longitudinal magnetic field. For this purpose, magnetic systems with a solenoid powered from the bank of molecular capacitors have been designed. The duration of a quasistationary magnetic field was 1 s at a maximum solenoid power of 365 kW. The possibility has been shown to exist for a self-contained power supply of the accelerator from the bank of molecular capacitors in the batch mode. With an average power consumption of about 120 kW, the setup produces pulses in a batch of duration 2.5 s at a pulse repetition rate of 200 Hz. [References: 18]