...
首页> 外文期刊>Nonlinear dynamics >Unified nonlinear electroelastic dynamics of a bimorph piezoelectric cantilever for energy harvesting, sensing, and actuation
【24h】

Unified nonlinear electroelastic dynamics of a bimorph piezoelectric cantilever for energy harvesting, sensing, and actuation

机译:双压电晶片压电悬臂的统一非线性电弹性动力学,用于能量收集,传感和驱动

获取原文
获取原文并翻译 | 示例

摘要

Inherent nonlinearities of piezoelectric materials are pronounced in various engineering applications such as sensing, actuation, combined applications for vibration control, and energy harvesting from dynamical systems. The existing literature focusing on the dynamics of electroelastic structures made of piezoelectric materials has explored such nonlinearities separately for the problems of mechanical and electrical excitation. Similar manifestations of softening nonlinearities have been attributed to purely elastic nonlinear terms, coupling nonlinearities, hysteresis alone, or a combination of these effects by various authors. In order to develop a unified nonlinear nonconservative framework with two-way coupling, the present work investigates the nonlinear dynamic behavior of a bimorph piezoelectric cantilever under low to moderately high mechanical and electrical excitation levels in energy harvesting, sensing, and actuation. The highest voltage levels, for near resonance investigation, are well below the coercive field. A distributed parameter electroelastic model is developed by accounting for softening and dissipative nonlinearities to analyze the primary resonance of a soft (e.g., PZT-5A, PZT-5H) piezoelectric cantilever for the fundamental bending mode using the method of harmonic balance. Excellent agreement between the model and experimental investigation is found, providing evidence that quadratic stiffness, damping, and electromechanical coupling effects accurately model predominantly observed nonlinear effects in geometrically linear vibration of piezoelectric cantilever beams. The backbone curves of both energy harvesting and actuation frequency responses for a PZT-5A cantilever are experimentally found to be dominantly of first order and specifically governed by ferroelastic quadratic softening for a broad range of mechanical and electrical excitation levels. Cubic and higher-order nonlinearities become effective only near the physical limits of the brittle and stiff (geometrically linear) bimorph cantilever when excited near resonance.
机译:压电材料的固有非线性在各种工程应用中都很明显,例如传感,驱动,振动控制的组合应用以及从动力系统中收集能量。专注于由压电材料制成的电弹性结构的动力学的现有文献已经针对机械和电激发的问题分别探讨了这种非线性。软化非线性的类似表现已被归因于纯弹性非线性项,耦合非线性,单独的磁滞或各种影响的组合。为了开发具有双向耦合的统一非线性非保守框架,本工作研究了在能量收集,传感和驱动中,在低至中高机械和电激发水平下双压电晶片压电悬臂的非线性动力学行为。用于近共振研究的最高电压水平远低于矫顽场。通过考虑软化和耗散非线性来开发分布式参数电弹性模型,以谐波平衡法分析基本弯曲模式的软压电悬臂(例如PZT-5A,PZT-5H)的主共振。该模型与实验研究之间发现了极好的一致性,这提供了证据,即二次刚度,阻尼和机电耦合效应可以准确地建模主要观察到的压电悬臂梁的几何线性振动中的非线性效应。通过实验发现,PZT-5A悬臂的能量收集和致动频率响应的主干曲线主要是一阶的,特别是在广泛的机械和电激发水平范围内,由铁弹性二次软化控制。当在共振附近激发时,立方和高阶非线性仅在脆性和刚性(几何线性)双压电晶片悬臂的物理极限附近才有效。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号