...
首页> 外文期刊>Neurosurgery >Accuracy of image-guided pedicle screw placement using intraoperative computed tomography-based navigation with automated referencing. Part II: thoracolumbar spine.
【24h】

Accuracy of image-guided pedicle screw placement using intraoperative computed tomography-based navigation with automated referencing. Part II: thoracolumbar spine.

机译:使用术中基于计算机断层扫描的导航和自动参考的图像引导椎弓根螺钉放置的准确性。第二部分:胸腰椎。

获取原文
获取原文并翻译 | 示例
           

摘要

BACKGROUND: Image-guided spinal instrumentation may reduce complications in spinal instrumentation. OBJECTIVE: To assess accuracy, time efficiency, and staff radiation exposure during thoracolumbar screw instrumentation guided by intraoperative computed tomography (iCT)-based neuronavigation (iCT-N). METHODS: In 55 patients treated for idiopathic and degenerative deformities, 826 screws were inserted in the thoracic (T2-T12; n = 243) and lumbosacral (L1-S1; n = 545) spine, as well as ilium (n = 38) guided by iCT-N. Up to 17 segments were instrumented following a single automated registration sequence with the dynamic reference arc (DRA) uniformly attached to L5. Accuracy of iCT-N was assessed by calculating angular deviations between individual navigated tool trajectories and final implant positions. Final screw positions were also graded according to established classification systems. Clinical and radiological outcome was assessed at 12 to 14 months. RESULTS: Additional intraoperative fluoroscopy was unnecessary, eliminating staff radiation exposure. Unisegmental K-wire insertion required 4.6 +/- 2.9 minutes. Of the thoracic pedicle screws 98.4% were assigned grades I to III according to the Heary classification, with 1.6% grade IV placement. In the lumbar spine, 94.4% of screws were completely contained (Gertzbein classification grade 0), 4.6% displayed minor pedicle breaches <2 mm (grade 1), and 1% of lumbar screws deviated by >2 to <4 mm (grade 2). The accuracy of iCT-N progressively deteriorates with increasing distance from the DRA, but allows safe instrumentation of up to 12 segments. CONCLUSION: iCT-N using automated referencing allows for safe, highly accurate multilevel instrumentation of the entire thoracolumbosacral spine and ilium, rendering additional intraoperative imaging dispensable. In addition, automated registration is time-efficient and significantly reduces the need for re-registration in multilevel surgery.
机译:背景:影像引导脊柱器械可以减少脊柱器械的并发症。目的:评估基于术中基于计算机断层扫描(iCT)的神经导航(iCT-N)指导的胸腰椎螺钉器械手术期间的准确性,时间效率和人员辐射暴露。方法:在55例接受特发性和退行性畸形治疗的患者中,在胸椎(T2-T12; n = 243)和腰s部(L1-S1; n = 545)以及i骨(n = 38)中插入了826枚螺钉由iCT-N指导。按照单个自动套准序列,最多可对17个片段进行检测,并将动态参考弧(DRA)均匀连接到L5。 iCT-N的准确性是通过计算各个导航工具轨迹与最终植入位置之间的角度偏差来评估的。最终的螺丝位置也根据已建立的分类系统进行分级。在12到14个月时评估临床和放射学结局。结果:不需要额外的术中透视检查,从而消除了工作人员的辐射暴露。单节K线插入需要4.6 +/- 2.9分钟。根据Heary分类,将98.4%的胸椎椎弓根螺钉分配为I级至III级,而IV级放置为1.6%。在腰椎中,完全装有94.4%的螺钉(Gertzbein分类为0级),有4.6%的椎弓根小裂口<2 mm(1级),而1%的腰椎螺钉偏离> 2至<4 mm(2级) )。随着距DRA距离的增加,iCT-N的精度会逐渐降低,但可以安全地检测多达12个片段。结论:使用自动参考的iCT-N可以对整个胸腰ac骨脊柱和i骨进行安全,高精度的多级检查,从而无需进行额外的术中影像检查。此外,自动注册非常省时,并且大大减少了多级手术中重新注册的需求。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号