...
首页> 外文期刊>New biotechnology >Formulation and characterization of an immobilized laccase biocatalyst and its application to eliminate organic micropollutants in wastewater
【24h】

Formulation and characterization of an immobilized laccase biocatalyst and its application to eliminate organic micropollutants in wastewater

机译:固定化漆酶生物催化剂的配制,表征及其在废水中去除有机污染物的应用

获取原文
获取原文并翻译 | 示例
           

摘要

Over the past decades, water pollution by trace organic compounds (ngL-1) has become one of the key environmental issues for developed countries. To date there is no effective and sustainable remediation strategy available. Laccases from white rot fungi were found particularly attractive for the removal of some micropollutants such as the plasticizer bisphenol A (BPA), the anti-inflammatory drug diclofenac (DF) and the steroidal hormone 17-α-ethinylestradiol (EE2). Laccase immobilization is a prerequisite for their use in continuous water treatment processes. In this study, laccase from Coriolopsis gallica was immobilized on mesoporous silica spheres in a two-step adsorption-crosslinking process. The initial laccase activity, crosslinker (glutaraldehyde) concentration and extra protein (albumin) concentration were varied following a central composite experimental design and optimized with respect to the immobilization yield, activity and thermal stability of the biocatalysts. After a multi-objective optimization of the biocatalyst formulation, a maximum biocatalyst activity of 383Ug~(-1), determined with 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonate) at pH 4.5, was obtained. Biocatalyst particles were physically characterized by means of scanning electron microscopy, Brunauer-Emmett-Teller surface area and Barrett-Joyner-Halenda pore size analyses revealing few modifications of the surface area and structure during/after the immobilization procedure. The biocatalyst showed a significantly higher thermostability than the free enzyme with a half-life of 31.5hours and 3.9hours compared to 6.1hours and 0.6hours at 55°C and 75°C respectively. The biocatalyst was able to eliminate in a continuously stirred membrane reactor more than 95% of BPA 10μM and EE2 10μM and 70% of DF 10μM when treated individually and more than 90% when treated as a mixture in aqueous buffered solution (pH 5) for more than 60 reactor volumes. In real wastewater conditions (pH 7.8) the biocatalyst could degrade more than 85% of BPA and EE2 along with 30% of DF when tested in mixture for more than 80hours, which illustrates the potential of this biocatalyst for the treatment of aquatic micropollutants.
机译:在过去的几十年中,微量有机化合物(ngL-1)对水的污染已成为发达国家的关键环境问题之一。迄今为止,还没有有效且可持续的补救策略。发现白腐真菌的漆酶对于去除某些微量污染物特别有吸引力,例如增塑剂双酚A(BPA),消炎药双氯芬酸(DF)和甾体激素17-α-炔雌醇(EE2)。漆酶固定是其在连续水处理过程中使用的先决条件。在这项研究中,来自鸡毛虫的漆酶以两步吸附-交联过程固定在介孔二氧化硅球上。最初的漆酶活性,交联剂(戊二醛)浓度和多余的蛋白质(白蛋白)浓度根据中央复合实验设计进行了变化,并针对固定化产率,活性和生物催化剂的热稳定性进行了优化。在对生物催化剂的配方进行多目标优化后,获得了最大的生物催化剂活性383Ug〜(-1),该活性由2,2'-叠氮基双(3-乙基苯并噻唑啉-6-磺酸盐)在pH 4.5下测定。通过扫描电子显微镜,Brunauer-Emmett-Teller表面积和Barrett-Joyner-Halenda孔径分析对生物催化剂颗粒进行物理表征,发现固定过程中/之后几乎没有表面积和结构的改变。该生物催化剂显示出比游离酶明显更高的热稳定性,其半衰期分别为55℃和75℃下的6.1小时和0.6小时,而半衰期分别为31.5小时和3.9小时。当单独处理时,该生物催化剂能够在连续搅拌的膜反应器中消除超过95%的BPA10μM和EE210μM和70%的DF10μM,并在缓冲液(pH 5)中作为混合物处理时消除90%以上。超过60个反应堆在实际废水条件下(pH 7.8),在混合物中进行80个小时以上的测试,该生物催化剂可能降解超过85%的BPA和EE2以及30%的DF,这说明该生物催化剂具有处理水生微污染物的潜力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号