Experimental evaluation of electromagnetic-thermal non-destructive inspection by eddy current thermography in square aluminum plate

摘要

The performance of electromagnetic-thermal non-destructive inspection is investigated experimentally by eddy current thermography. The experiments concerned the detection of the crack in ten square aluminum plates at various positions and orientations. For the excitation are employed two circular coils with an outer diameter either smaller or comparable to the plate side. Crack detection is based not only on the thermograms, but on data processing techniques as well. Despite the fact that the performance of the infrared camera used is relatively low and the exciting frequency was only 50 Hz, the coil with small section detected effectively the nine cracks out of the ten while the coil with large section detected effectively seven out of ten.