Short hot wire technique for measuring thermal conductivity and thermal diffusivity of various materials

摘要

A transient short hot wire technique (SHWT) is developed for simultaneous determination of the thermal conductivity and thermal diffusivity of various materials such as liquids, gases or powders. A metal wire with (or without) insulation coating serves both as a heating unit and as an electrical resistance thermometer and the wire is calibrated using water and toluene with known thermophysical properties. This SHWT includes correlation of the experimental data with numerically simulated values based on a two-dimensional heat-conduction model. For the measurements with proportional relation between temperature rise and logarithmic heating time interval, the thermal conductivity and thermal diffusivity are obtained from the slope and the intercept of the measured temperature rise and those of calculated non-dimensional temperature rise by including the heat flux and the properties of the wire. For the measurements with nonlinear relation between temperature rise and logarithmic heating time interval, the thermal conductivity and thermal diffusivity are extracted from a curve fitting method by using the downhill simplex method to match the experimental data and the numerical values. This technique is applied here using air as a testing sample. The effect of natural convection is investigated and the accuracy of this measurement is estimated to be 2percent for thermal conductivity and 7percent for thermal diffusivity.