首页> 外文期刊>Microporous and mesoporous materials: The offical journal of the International Zeolite Association >Chemically controlled particulate properties of zeolites: Towards the face-less particles of zeolite A. 2. Influence of aluminosilicate batch concentration and alkalinity of the reaction mixture (hydrogel) on the size and shape of zeolite A crystals
【24h】

Chemically controlled particulate properties of zeolites: Towards the face-less particles of zeolite A. 2. Influence of aluminosilicate batch concentration and alkalinity of the reaction mixture (hydrogel) on the size and shape of zeolite A crystals

机译:沸石的化学控制颗粒性质:朝向沸石A的无面颗粒。2.硅铝酸盐批料浓度和反应混合物(水凝胶)的碱度对沸石A晶体尺寸和形状的影响

获取原文
获取原文并翻译 | 示例
       

摘要

Influence of the simultaneous change of batch alkalinity (A = [Na2O/H2O]_b) and total batch silica concentration (tsc = [SiO2/H2O]b) of the reaction mixture, at two characteristic batch molar ratios, y ≡ [SiO2/ Al2O3]_b (1.3 and 2.0), on the duration of crystallization, reaction yield and the particulate properties (size and shape) of the crystalline end product (zeolite A) was investigated. Sharp decrease of the duration of crystallization process with simultaneous increase of A and tsc is caused by simultaneous increase of the number of nuclei formed in gel matrix, rate of their release from the gel matrix and their growth with the increase of the alkalinity of the reaction mixture. Although the reaction yield, Y_R, is proportional to the total batch silica concentration, tsc, the ratio Y_R/tsc slightly decreases with increasing alkalinity as a consequence of the increasing solubility of zeolite A with the increase of the alkalinity. Specific number of crystals (number of crystals per unit mass of the crystalline end products), N_s increases with simultaneous increase of A and tsc as a consequence of the increase of the number of nuclei formed in the gel matrix with increase of alkalinity of the reaction mixture. On the other hand, a complex dependence of the crystal size distribution on A, tsc and y, is a consequence of influence of the mentioned chemical factors not only on the number of nuclei, but also on their distribution in the gel matrix. Four different morphological forms of zeolite A, namely, (i) regular cubic crystals with "sharp" edges and apexes, (ii) cubic crystals with truncated edges, (iii) cubic crystals with "rounded" edges and apexes and (iv) pseudo-spherical, face-less particles are obtained during hydrothermal treatment of investigated hydro-gels. Influence of the chemical factors on the formation of particular morphological forms of zeolite A are discussed and the possible mechanisms of their formation are considered.
机译:在两个典型的批处理摩尔比y≡[SiO2 / 2]下,反应混合物的批处理碱度(A = [Na2O / H2O] _b)和批处理二氧化硅总浓度(tsc = [SiO2 / H2O] b)同时变化的影响[Al 2 O 3] _b(1.3和2.0),在结晶持续时间,反应产率和结晶终产物(沸石A)的颗粒性质(尺寸和形状)上进行了研究。随着A和tsc的同时增加,结晶过程的持续时间急剧减少,这是由于凝胶基质中形成的核数,凝胶基质中释放的速率以及随着反应碱度的增加而增长所致。混合物。尽管反应产率Y_R与总批料二氧化硅浓度tsc成正比,但是随着碱度的增加,随着沸石A的溶解度增加,Y_R / tsc的比率随碱度的增加而略微降低。特定晶体数(每晶体质量的晶体终产物的晶体数)N_s随着A和tsc的增加而增加,这是由于随着反应碱度的增加,凝胶基质中形成的核数增加混合物。另一方面,晶体尺寸分布对A,tsc和y的复杂依赖性,是上述化学因素不仅影响核数,而且影响其在凝胶基质中的分布的结果。沸石A的四种不同形态形态,即(i)具有“尖锐”边缘和顶点的规则立方晶体,(ii)具有截短边缘的立方晶体,(iii)具有“圆形”边缘和顶点的立方晶体,以及(iv)伪在对所研究的水凝胶进行水热处理过程中获得了球形,无面的颗粒。讨论了化学因素对沸石A特定形态形态形成的影响,并考虑了其形成的可能机理。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号